Technical training
Basic Technical Training Standard / V9 2024-06-24
Mandatory! Wear Protective Gloves Type: to be filled out by training provider
4.2 Chemicals and Lubricants
It is mandatory to comply with the following safety precautions when handling tools for any bolt tensioning task
Lubricants
Training provider: Insert image of the container for chemical being used for training
Warning! Chemical Hazard Wear required PPE stated in the Safety Data Sheet (SDS) according to the chemical in question
Hydraulic Fluid
Training provider: Insert image of the container for chemical being used for training
Warning! Chemical Hazard Wear required PPE stated in the Safety Data Sheet (SDS) according to the chemical in question
4.3 General Precautions When Tensioning
Bolts in turbines are always tightened to specific values.
Over-tightening a bolt may lead to the bolt being damaged or failure (breaking) during turbine operation.
Under-tightening a bolt may cause bolt to loosen during turbine operation, leading to the overload of neighbouring bolts, which may subsequently fail.
It is important to follow the procedures described in this document to prevent personal injury, damage to bolts or equipment or bolt failure during turbine operation.
Global Wind Organisation / www.globalwindsafety.org
251 / 269
Made with FlippingBook Digital Proposal Creator