Technical training
Basic Technical Training Standard / V9 2024-06-24
• Element 5.4.1 changed to ‘function of feeler gauges’
• Element 5.5.1 changed to ‘function of callipers’
• Element 5.6.1 changes to ‘function of dial gauges’
• Element 6.1.2 & 6.1.4 inserted ‘how to inspect hydraulic ...’
Electrical Module time changes (not affecting overall module duration):
• Introduction to electricity reduced from 90 to 70 min.
• Electric circuits increased from 80 to 120 min.
• Electric components reduced from 120 to 100 min.
Electrical module content change:
• Element 3.1.2 inserted ‘the importance of working to ...’
• Element 3.2.3 inserted megohmmeter as a source of HV danger
• Element 3.2.4 inserted ‘the requirement for HV training’
• Element 3.3.3 inserted ‘not all circuits protected by RCD’
• Lesson 4 LO’s removed demonstrate to lesson 6
• Element 4.6.5, 4.7.5 & 4.8.6 moved to lesson 6
• Lesson 7 LO 2 added PT100 and Bridge rectifier (moved from lesson 4)
Element 7.2.2 wording change
•
• Element 3.8.1 Inserted ‘explain ... emergency stop’
Element 3.8.2 Inserted ‘describe typical ...’
•
• Element 3.8.3 Inserted ‘explain that emergency...’
Hydraulic module time changes (Not affecting overall module duration):
Lesson 2 increased from 25 to 30 minutes
•
Lesson 10 reduced from 45 to 40 minutes
•
Hydraulic module content changes:
• Element 2.1.2 Inserted ‘explain the relationship...’
• Element 3.1.2 Inserted ‘according to approved WI’
• Element 3.2.3, 3.2.4 Inserted ‘emergency stop buttons’
• Element 3.3.3 Inserted ‘the risks associated with trapped pressure.
Global Wind Organisation / www.globalwindsafety.org
267 / 269
Made with FlippingBook Digital Proposal Creator