Technical training
Basic Technical Training Standard / V9 2024-06-24
Amendment date
Version
Approved by & date
2018
4
GWO TC 2018
Description of changes
• New module ‘Installation’ developed and inserted.
Amendment date
Version
Approved by & date
2017
3
GWO TC 2017
Description of changes
Content changes:
• New name: Basic Technical Training (replaces Basic Maintenance Training) to reflect a wider target group for the standard
• New intro “Scope” replaces “Foreword and Editorial”
• General: new section on “Understanding GWO Learning Objectives” incl. Taxonomy Table
• General: new section on “Conformity with other training” section added
• Entire course duration shorter (at least 31 hrs and 20 min contact time.) due to elimination of various redundant content and rearrangement of multiple objectives, lessons and elements • BTT now organised as three separate modules, and requires upload of 1 record per module to allow for greater flexibility • Module timetables are specified as approximations, as long as the total duration is not reduced, and practical elements are not reduced in length • If all three modules are delivered as a single training, introductory elements and evaluation elements may be combined
New lesson for Hydraulic tightening tools
•
Control Measure Form modified
•
Handout requirement included
•
Requirements for the test
•
Duplicated sensors removed
•
• List of Definitions to avoid different interpretations by training providers
Global Wind Organisation / www.globalwindsafety.org
268 / 269
Made with FlippingBook Digital Proposal Creator