Technical training
Basic Technical Training / V8 2023-05-02
ELEMENT 7.2 - INSPECTION OF THE MECHANICAL BRAKE SYSTEM
Learning objective:
61) The participants can perform the inspection of the mechanical brake system (Skills, intermediate level)
The instructor shall:
Explain how to check the disc surface for wear and scuffing due to excess friction
Explain how to check the disc brake pads for wear
Facilitate practice for the participants in checking the thickness of the brake pads and measuring the thickness of the brake disc Give constructive feedback on the participants’ checking of the thickness of the brake pads and measurement of the thickness of the brake disc
The participants shall:
Practice checking the thickness of the brake pads
Practice measuring the thickness of the brake disc
LESSON 8 - YAW SYSTEM
30 min.
The aim of this lesson is to give participants the basic knowledge of the yaw system.
ELEMENT 8.1 - THE FUNCTION OF THE YAW SYSTEM
Learning objectives:
62) The participants can recognise the function and operation of the yaw system (Knowledge, basic level)
63) The participants can describe the hazards associated with the yaw system (Knowledge, basic level)
64) The participants can describe the importance of appropriate isolation/locking techniques (Knowledge, basic level)
Global Wind Organisation / www.globalwindsafety.org
41 / 262
Made with FlippingBook Digital Proposal Creator