Technical training
Basic Technical Training Standard / V9 2024-06-24
ELEMENT 9.2 - INSPECTION OF THE COOLING SYSTEM
Learning objectives:
72) The participants can perform the visual inspection of the cooling system (Skills, intermediate level)
73) The participants can recognise the importance of checking the cooling liquid and checking the cleanliness of the heat exchanger (Knowledge, basic level)
74) The participants can describe the importance of documenting any damage found (Knowledge, basic level)
75) The participants can use the correct PPE for inspection of the cooling systems (Skills, intermediate level)
The instructor shall:
Explain how to perform a visual inspection of cooling systems (e.g. pin holes, cracks, cuts, friction marks, leaks)
Show the importance of checking the cooling liquid
Explain how to check the cleanliness of the heat exchanger
Show the importance of documenting any damage found
Facilitate practice for the participants in the visual inspection of cooling systems, and documenting the findings and the correct use of PPE
Give constructive feedback on the participants’ visual inspection of cooling systems and documentation of the findings and correct use of PPE
The participants shall:
Practice the visual inspection of cooling systems and documenting the findings
Practice the correct use of PPE
LESSON 10 - LUBRICATION SYSTEM
75 min.
Global Wind Organisation / www.globalwindsafety.org
45 / 269
Made with FlippingBook Digital Proposal Creator