Technical training
Basic Technical Training Standard / V9 2024-06-24
Electrical measuring instruments
How to measure with electrical measuring instruments
7.2
7.3
Measuring points TOTAL
70 min.
8. Summary and theoretical test
8.1
Summary
8.2
Theoretical test TOTAL Training review TOTAL
30 min.
9. Training review
9.1
15 min.
GRAND TOTAL
605 min.
Table 10.5.1 – BTT Electrical module timetable
10.6 Detailed Description of the BTT Electrical Module LESSON 1 - INTRODUCTION
30 min.
The aim of this lesson is to enable the participants on the GWO BTT Electrical Module training to engage in the training safely and with motivation, while recognising what is expected of them during the training.
If this module is delivered combined with other BTT modules to the same participants, the redundant introductory elements shall not be repeated
Note
After successfully completing this lesson of the BTT Electrical Module, the participants can:
7) Describe the module content and the facilities involved to ensure a clear understanding of what is expected during the module (Knowledge, basic level)
8) Name and point out local emergency procedures and facilities (Knowledge, basic level)
9) Describe the relevant human factors and the implications thereof (Knowledge, basic level)
ELEMENT 1.1 - SAFETY INSTRUCTIONS AND EMERGENCY PROCEDURES
Learning objectives:
10) The participants can recognise the safety instructions, rules and emergency procedures (Knowledge, basic level)
Global Wind Organisation / www.globalwindsafety.org
70 / 298
Made with FlippingBook Digital Proposal Creator