Technical training
Basic Technical Training / V8 2023-05-02
10. Oil and filters
10.1 10.2 10.3 10.4
Handling oil procedures/cleanliness
Collecting an oil sample
Check oil level
Filters TOTAL
45 min.
11. Hydraulic diagrams
11.1 11.2
Symbols and diagrams
Identifying measuring points TOTAL Pressure gauge/manometer
45 min.
12. Pressure measuring tools
12.1 12.2
Pressure measuring TOTAL
20 min.
13. Summary and theoretical test
13.1 13.2
Summary
Theoretical test TOTAL Training review TOTAL GRAND TOTAL
30 min.
14. Training review
14.1
15 min. 535min.
Table 11.5.1 – BTT Hydraulic module timetable
11.6 Detailed description of the BTT Hydraulic Module LESSON 1 - INTRODUCTION
30 min.
The aim of this lesson is to enable the participants on the GWO BTT Hydraulic Module training to engage in the training safely and with motivation, while recognising what is expected of them during the training.
If this module is delivered combined with other BTT modules to the same participants, the redundant introductory elements shall not be repeated.
Note
After successfully completing this lesson of the BTT Hydraulic Module, participants will be able to:
14) Describe the module content and the facilities involved to ensure a clear understanding of what is expected during the module (Knowledge, basic level)
15) Name and point out local emergency procedures and facilities (Knowledge, basic level)
Global Wind Organisation / www.globalwindsafety.org
87 / 262
Made with FlippingBook Digital Proposal Creator