Technical training
Basic Technical Training Standard / V9 2024-06-24
ELEMENT 6.2 - ASSEMBLY OF AN ELECTRICAL CIRCUIT
Learning objective:
80) The participants can perform the assembly of a simple electric circuit (Skills, intermediate level)
The instructor shall:
Facilitate practice to improve the participants’ ability to assemble an electrical circuit following a basic electrical diagram including the components mentioned in the equipment list for the BTT Electrical Module
Facilitate practice in the correct operation of the circuit
Give constructive feedback on the above practice
The participants shall:
Practice the ability to assemble an electrical circuit following a basic electrical diagram including the components mentioned in the equipment list for the BTT Electrical Module
Practice the correct operation of the circuit
LESSON 7 - ELECTRICAL MEASURING INSTRUMENTS
70 min.
The aim of this lesson is to give the participants the basic knowledge about the correct and safe way to measure current, voltage, resistance, continuity, diodes and capacitance.
ELEMENT 7.1 - SYMBOLS AND SETTINGS ON ELECTRICAL MEASURING INSTRUMENTS
Learning objectives:
81) The participants can recognise the symbols and settings used for current, voltage and resistance in the measuring instruments (Knowledge, basic level)
82) The participants can describe how to identify the validity of tools (Knowledge, basic level)
Global Wind Organisation / www.globalwindsafety.org
96 / 298
Made with FlippingBook Digital Proposal Creator