Safety training
GWO Advance Rescue Refresher Training / V4 2023-05-02
The instructor shall: Demonstrate the correct rigging and attachment of the evacuation device Demonstrate how to apply fall protection at any point when there is a risk from falling from height Demonstrate how to perform a passive mode setup self-rescue from an evacuation hatch Demonstrate how to perform an active mode setup double evacuation from an evacuation hatch, applying a deflection/friction connector on the rescue device and using a fall restraint lanyard kept as short as possible as a connecting element between the rescue / evacuation device and the harness Demonstrate how to reduce the risks associated with manual handling and apply further control measures where applicable Provide constructive feedback on the participants’ efforts during the exercise with focus on their ability to perform correctly, safely, and responsibly
One exercise per participant.
Note
The participants shall: Practise as a group the correct rigging and attachment of the evacuation device Practise how to apply fall protection at any point when there is a risk from falling from height. Practise a passive mode setup self-rescue from an evacuation hatch Practise an active mode setup double evacuation from an evacuation hatch, applying a deflection/friction connector on the rescue device and using a fall restraint lanyard kept as short as possible as a connecting element between the rescue / evacuation device and the harness Practise how to reduce the risks associated with manual handling and apply further control measures where applicable
MEASURES TO PREVENT INJURY DURING TRAINING
20 min. Aim: The aim of this lesson is to reduce the risk of injury during training by ensuring that the participants are briefed in the control measures employed in the training area and to warm up prior to performing rescue exercises.
Global Wind Organisation © 2023/ www.globalwindsafety.org
46 / 100
Made with FlippingBook Digital Proposal Creator