Safety training
Basic Safety Refresher Training / V12 2023-05-02
The following equipment is required to instruct the BSTR Working at Heights and BSTR Working at Heights with Manual Handling Modules. Within each equipment category one product or more must be operative for practical training. Required additional different products are accepted in a limited quantity as products for hands-on demonstration. The training provider must select the most relevant products according to their geographic location and target audience.
1.
full body harness:
a.
at least two different products
2.
fall restraint lanyards
b.
at least two different adjustable products
3.
fall arrest lanyards with an energy absorber:
c.
one flexible Y-type;
d.
one fixed adjustable Y- or I-type.
e. recommended but not required: 1 fixed or flexible V-type.
4.
helmets
5.
vertical fall arrest system with the following sliders / gliders:
a.
cable guide twist type attachment
b.
cable guide slot type attachment
c.
cable guide clamp type attachment
d.
rail type attachment
6.
self-retractable lifeline (SRL)
7.
slings
The European Standard for slings specifies safety requirements and test methods for slings used for mountaineering (slings are used as anchor points and since there are no industrial standard for slings, they must also comply with the requirements in EN795 type B, anchor devices)
Note
8.
connector with mandatory automatic closing and locking system
9.
evacuation / rescue devices:
a.
one emergency descent and one rescue device, or,
Global Wind Organisation©2023 / www.globalwindsafety.org
96 / 129
Made with FlippingBook - professional solution for displaying marketing and sales documents online