45 D
41500
4017
42900
58100
60050
3046
42890
51797
40100
51795
18650
42910
3053
8629
41450
PULLERS, SEPARATORS, HUB TOOLS Number
Description
Price
ATD-3046 Pitman Arm Puller - Heavy-duty center screw and heat treated yoke drop forged from high grade alloy steel for a safe and steady pull. Heavy-duty yoke eliminates spreading and breakage.
$41.69
ATD-3053 Rear Axle Puller Set - Slide hammer pulls many flange-type rear axles and axle bearings. Includes: (3) bearing adapters, (1) 5/8”-18T x 22-1/2” slide screw, (1) 5/8” lock nut, (1) axle yoke, (1) 3.75 lbs. slide hammer, (1) bearing hook. $180.69 ATD-8629 Wheel Hub Removal Tool - Safely removes frozen hub assemblies instantly. Universal mount fits all axle bolted hubs (5, 6 and 8 lug hubs). Mounts to 2 studs using supplied flange nuts. Use with 5 lbs. hammer to knock frozen hubs out of axles. 3/4” steel backing plate and reinforced striking plate for long life. $184.39 ATD-8700 Ball Joint Separator - 15/16” Opening x 12” Long $21.89 ATD-8701 Tie Rod Separator - 5/8” Opening x 16” Long $22.89 ATD-8705 5-Pc. Ball Joint and Tie Rod Separator Set - Made of heavy, drop-forged chrome vanadium steel. Includes: (3) Forks: 11/16”, 15/16” and 1-1/8”, (1) Handle for use with air hammer and (1) Handle for use with manual hammer $59.19 MTI-18650 Heavy-Duty Pitman Arm Spreader - Spread the open end of a pitman arm for easy removal on Class 3-8 vehicles. Easily install bearing cups of SPL series u-joints into full round yokes. $89.99
CCT-4017 Axle Popper Kit 2-Pc. - Separates half-shafts from transaxle. Shim tool is included to fill gaps on some applications. Better and safer than hammer and bar. Both are 14” / 36cm long with 2” / 51mm opening. Machine forged for strength and durability.
$65.69
LIS-40100 Hub Remover - Fits on most 5, 6 and 8 lug hub assemblies found on cars and trucks. Bolt the 1/2” thick driving plate to the hub using the hardened washers and existing lug nuts. Insert the hardened thread forcing screw to push against a solid surface to loosen the hub assembly $140.89 LIS-41450 Intermediate Pitman Arm Puller - Fully Heat-treated, High-strength Cast Steel Tools for Removing Stubborn Pitman Arms. 41450 works on pitman arms on medium duty trucks and other vehicles with pitman arms held on with a nut. For impact use. $137.09 LIS-41490 Pitman Arm Puller For M100 Sheppard - Fully Heat-treated, High-strength Cast Steel Tools for Removing Stubborn Pitman Arms. 41490 works on Sheppard M100 steering gears found on many Class 6-8 vehicles. For impact use. $95.89 LIS-41500 Pickle Fork Kit - Kit consists of (3) forks and (2) handles; (1) for manual hammering and (1) for use with an air hammer (.401” shank). Heavy-duty forgings, handles are heat-treated alloy steel. $64.69 LIS-41610 Pitman Arm Puller For M110 Sheppard - Fully Heat-treated, High-strength Cast Steel Tools for Removing Stubborn Pitman Arms. 41610 works on Sheppard M110 steering gears found on many Class 6-8 vehicles. For impact use. $217.69 LIS-42890 U-Joint Puller, Small - Quickly and easily remove sealed U-Joint caps without damage to driveshafts, yokes or bearing caps. Works on cars, light-duty trucks and agriculural equipment with 1” to 1.25” caps $81.79 LIS-42900 U-Joint Puller, Medium - Quickly and easily remove sealed U-Joint caps without damage to driveshafts, yokes or bearing caps. Works on Class 7 and 8 trucks with 1.5” to 2.2” caps $113.29 LIS-42910 U-Joint Puller, Large - Quickly and easily remove sealed U-Joint caps without damage to driveshafts, yokes or bearing caps. Works on cars, medium-duty trucks, agriculural equipment and light industrial vehicles with 1.125” to 1.7” caps $212.09
LIS-58100 12-Pc. Inner Tie Rod Tool Set - The long socket slips over tie rod end and crows foot engages on socket for easy removal and installation of tie rods with inaccessible wrench flats. Includes: (12) Crowsfeet: 1-3/16”, 1-1/4”, 1-3/8”, 1-1/2”, 1-5/16”, 1-7/16”, 29mm, 32.5mm, 33.6mm, 38.4mm, 40mm and 42mm to fit many cars, trucks and SUVs.
$202.09
LIS-60050 Heavy-Duty Yoke Puller - For use on yokes with a bearing diameter between 1-7/8” and 2-13/16”. These yokes are commonly found on Class 6-8 trucks. Kit comes with strong, grade eight bolts. All components are heat-treated. $247.69 TIT-51795 15/16” Pneumatic Ball Joint Separator - Separates ball joints with minimal shock to components. Engineered with a 0.401. Overall length: 3”; Fork width: 15/16”; Material: Chrome Moly Alloy Steel $21.99 TIT-51797 21/32” Pneumatic Tie Rod Separator - Separates tie rods with minimal shock to components. Engineered with a 0.401. Overall length: 3”; Fork width: 21/32”; Material: Chrome Moly Alloy Steel $21.99
BALL JOINT SERVICE XL C-FRAME BALL JOINT PRESS • 9.1” throat, 11.9” length • Extra-large ball joint press for maximum clearance • Kit includes both long and short drive screws for shorter overall working length when desired • Includes a notched foot to allow pressing out of ball joints without removal of top-mounted grease fittings
DELUXE BALL JOINT SERVICE SET Includes: C-frame press; (3) receiver tubes in sizes: 2-3/4” x 3”, 2-1/4” x 2-1/2” and 1-3/4” x 2”; Installation and removing adapters for 1967 through current 1/2- and 3/4-Ton 4WD vehicles having the Dana 44 front axle (found on Ford, GM, Dodge, IHC and Jeep vehicles); Molded storage case included
ATD-8695. ............................................................................................... $113.09
ATD-8696. ............................................................................................... $103.79
ADD-ON BALL JOINT ADAPTER SET • Expands the serviceability of your deluxe ball joint service set ( ATD-8696 ) • Includes all the receiver tubes and removing/installing adapters needed to work on most 2WD and 4WD pickups, vans and SUVs thru 2006 • Application chart included • Molded storage case included
21-PC. MASTER BALL JOINT SERVICE SET The set includes all of the receiver
5-PC. BALL JOINT & TIE ROD SEPARATOR SET FREE
tubes and adapters needed to work on press-fit upper and lower ball joints on most 2WD and 4WD pickups, vans and SUVs through 2006
$59.19 VALUE ATD-8705
ATD-8697. ................................................................................................. $97.49
ATD-8699. ............................................................................................... $219.89
Made with FlippingBook flipbook maker