69 D
55045
5500
192
FF310
55042
5503
28400
55033
195
CIRCUIT TESTERS Number
Description
Price
ATD-5500 Primary Circuit Tester with Ground Clip - Tests 6 and 12V systems. Locates shorts, open circuits and grounds. Use with ignition on. Clip to ground anywhere on vehicle and use probe to make contact with wire or cable being tested. Bulb indicates condition of circuit $12.59 ATD-5503 Cordless Professional Circuit Tester 3–28V - Tests circuits from 3 to 28 Volts DC. LED light and buzzer indicator. Does not require a ground wire or clip. Safe for work on automotive computers, ECMs, airbags, etc. Special V-tip allows safe piercing and can be removed to test hard-to-reach places. Operates on replaceable long-life “N” or “LR-1” size alkaline batteries (included) $24.89 ATD-5513 Heavy-Duty Circuit Tester - Easily checks 6 and 12V systems. 5 ft. heavy-duty lead. Tough plastic handle lights up if circuit is good. Lead remains flexible in low temperatures $17.29 ATD-5624 Heavy-Duty Circuit Tester with Coiled Lead Wire - New coil cord design for ease of use. Acetate handle, coiled lead wire. Easily checks 6 and 12V systems. New full size comfortable acetate handle lights up when circuit is good. Leads remain flexible in low temperatures. Ground lead stretches up to 10 ft $18.69 ATD-55033 Heavy-Duty Cordless Circuit Tester 3–30V - 3–30V detection range of DC voltage. Bi-directional polarity testing: Power and Ground. Dual color LED indicates red for power and green for ground on 6V, 12V and 24V systems. Compact size for use in tight access areas. Computer safe. For use on automotive, commercial vehicle and equipment repair $57.89 ATD-55042 12–42V Hybrid Circuit Tester - For use on 12V & 42V Hybrid systems. Automatic Voltage Identification: BLUE LED for 12V and RED LED for 42V. Pointed probe tests through wire insulation. Computer and airbag safe. 12 ft. heat and oil resistant coiled cord $30.69 ATD-55045 3–48 Volt LCD Wide Range Digital Circuit Tester - Large backlit LCD display for visible voltage readings. Checks electrical circuits on all 3–48 volt vehicle systems. Impedance Rating: 200–4000 Ohms. 12 ft. coiled test lead $41.99 ESI-192 Relay Buddy® 12/24 (Tester only) - Settable to 4 and 5 pin relay. Three diagnostic trouble codes. #192 includes the Relay Buddy and a zippered case $102.79 ESI-193 Relay Buddy® Pro Test Kit - #193 includes (5) relay adapters, (3) adapters for testing shielded relays and (2) adapters for testing new relay types commonly used on fuel pumps and other powered devices $222.69 ESI-195 Super Relay Buddy® Pro Test Kit - It applies a 7+ amp load to the relay and looks for excessive voltage drop. Test results are displayed by the green, yellow or red LED. #195 can test 10 different 12V relays. Includes three adapters for shielded relays $247.79 LIS-28400 Heavy-Duty Circuit Tester - Quickly tests low voltage up to 12 volts. The probe, handle, cord and clamp are reinforced for extra durability. Comes with a strain relief spring on the cord. Cord is 49” $15.79 LIS-32900 Heavy-Duty Circuit Tester/Jumper - Heavy-duty circuit tester for checking low voltage up to 12 volts. By depressing the red button the tester becomes a jumper for powering electrical components or a ground. The probe, handle, cord and clamp are reinforced for durability. Comes with a strain relief spring on the cord $25.79 MTI-FF310 FaultFinder Short/Open Circuit Finder & Circuit Tracer - Ready for use in the new generation of vehicles with mixed or single 24V systems. Internally protected against power surges and overloads. 8” flexible probe reaches wires in congested places. LEDs show open or short circuit conditions. Trace wires inside bindles, conduits, behind panels, under carpets, upholstery, etc $199.95
MASTER GLOBAL FUEL INJECTION PRESSURE TEST KIT FUEL SYSTEM TESTING
MASTER FUEL INJECTION PRESSURE TEST KIT • Tests most fuel injection systems both foreign and domestic • Features (2) gauges with gauge protectors for accurate testing from 5-150 psi • Includes late model GM, Chrysler, Mitsubishi and European applications
PRESSURIZED INDUCTION TOOL KIT • Can be used to clean induction system through the air intake or through a vacuum line • Tool comes complete with S-tool and vacuum line attachment • Easy to read gauge for accurate pressure settings • Sight glass allows the Technician to monitor chemical level – no guessing when the service is complete • Schrader valve on gauge assembly allows for simple, safe depressurization of the system when the service is complete
• Covers all major model vehicle platforms, domestic and foreign, 1988 to present (does not include CIS/TBI) • Test gauge assembly disconnects from test hose and valve assembly for easier storage and improved gauge protection
ATD-5578.......................................................$606.09
MOV-200-1145..............................................$519.95
ATD-5650.......................................................$440.09
NOID LIGHT SET • Quickly and easily tests electronic fuel injection systems on: GM TBI; GM ‘87 - present; GM ‘82-’91; Bosch PFI; Ford TBI; GM PFI; Geo TBI; GM SCPI
DELUXE VACUUM/FUEL PUMP TEST KIT • Complete with 2 ft. of high quality hose, plus (3) fittings to test domestic and foreign cars and trucks with gasoline engines
FUEL INJECTION CANISTER CLEANER • Two gauges enable a Technician to check the vehicle fuel pressure with the right side gauge, and then easily set cleaning pressure with the left side gauge by referring to vehicle fuel pressure on the right side gauge • Cleans carbon from intake valves, injectors, and combustion chambers with a professional carbon cleaning solution
• 3-1/2” compound gauge has a multicolor dual scale dial with ranges from 0-10 psi, 0-0.7kg/cm2 pressure and 0-28inHg/0-70cmHg vacuum • Hook-on gauge enables technician to hang gauge and hose assembly to free his hands
ATD-5612.........................................................$63.99
BASIC FUEL INJECTION PRESSURE TESTER
ATD-5657.........................................................$40.39
MTI-TU470B...................................................$284.09
Tests most systems except Bosch CIS and GM TBI; 2-1/2” dual scale gauge reads 0–100 psi or 0–7 BAR; includes the necessary adapters, banjo bolts, and 16” gauge hose with quick coupler and adapter guide book ATD-5633...........................$197.39 FUEL INJECTION PRESSURE TESTER Basic fuel injection tester includes large and small Schrader adapters, M6-1.00 O-ring adapter and tee manifold. 2-1/2” gauge has dual scale dial with ranges from 0-100 psi and 0-7 BAR
FUEL INJECTION PRESSURE TESTER WITH SCHRADER ADAPTERS • Enables testing on all cars with standard or small Schrader valves • The 3-1/2” gauge (with hook for hands
3 WAY EXHAUST BACK PRESSURE KIT • Allows quicker and more accurate testing of exhaust blockages in catalytic converters, mufflers, etc • The 2-1/4” special gauge has two multicolored bands for measuring at idle and 2500 RPM
free use) has a dual scale dial with ranges from 0-100 PSI and 0-7 bar
• Quick Coupler connection at end of gauge hose (other QC adapters can be purchased as needed)
MTI-TU469.....................................................$154.09
MTI-TU24APB.................................................$131.59
ATD-5567................... $62.09
Made with FlippingBook flipbook maker