India DEKS Products

TECHNICAL INFORMATION

EASY TO WORK WITH

=

Selection Guide Code Pipe Size mm PipeSize inches Roof Pitch “with 4.5 fasteners per square metre of roofing sheet, washers play a significant role in any roofing project.” because washers are small and relatively inexpensive, their importance in a roofing project is sometimes overlooked. however, a poor quality washers can result in enormous cost if it is badly designed and made of inferior material. Early breakdown of the washers will result in, at best, the replacement of all screws and seals across the entire roof, and at worst, considerable water damage to the building. The washer is vital in maintaining the iterity of the roofing syatem. Base mm Colours SDAlOM 0-8mm x 10 0-45 'or 1 1/, 2 500 X 600

0- y. .. o-%"

0 - 30mm

SDAMINI

500 X 600

0-45 or 1 1/, 2

12-70mm

SDAlOO

500 X 600

½-2%"

0-45'' or 1 1/, 2

}

Black (EPDM)

50-170mm

SDA101

500 X 600

2-6 3/4"

0-45 'or 1 1/, 2

= design = material = conductivity = traceabilty

SDA102

110-200mm

600 X 600

4½-B"

0-45" or 1 1/, 2

0-45 ·' or There are four vital components to a good washer: 1 1/, 2 0-45" or 1 1/ ,2

160-300mm

SDA103

6¼-11 %"

764 X 764

12 -17"

SDA104

300-450mm

956 X 956

Available in Black EPDM

=

=

EPDM will withstand constant temperatures at the roofline of -50 ° C (-58 ° F) to 115 ° C (239 ° F) and up to 150 ° C (302 ° F) intermittently MATERIAL TRAcEABILTY

EPDm (Ethylene Propylene Diene monomer’s) blended with uV and ozone stabilizers, curatives and processing oils. The blend is critical to sealing, uV resistance, life span and condutivity. The secret of the DEKS washer is its premium EPDm compound.

DEKS premium range of washers are proudly marked with deks name or a registered feature such as the blue line. always insist on genuine parts.

Important Cut tabs and turn themunder the tile at the base of the Dektite' Aluminium· for stability. Trim to fit as required.

Cut tabs and then just press and tab the bottom corners to form a soaker run off tray.

Place upper edge of base under tiles, forming an anti-capillaryfold.

Trim Dektite • cone to suit pipe size using sharp tin snips.

After lubricating the flue with water slide Dektite Aluminium down to the tile level.

=

cOnducTIvITY

No conductivity

Threshold conductivity

Low conductivity

High conductivity

Very low levels of carbon black inhibit the performance

Just enough to be non- conductive with excellent performance

a little too much creates an eletrical path

high Density poses a corrosion risk

“we have found that DEKS black EPDm washers exhibit exceptional levels of performance and provide complete compitibility with bhP Colourboard and Zincalume coated steels.,a controlled level of carbon in this product provides superior machenical properties and superior overall durabulity.” SEnIor PrInCIPaL rESEarCh EngInEEr. bhP rESEarCh.

Need to flash a tiled roof? Contact R E ALM to discuss the tile roof flashing range.

Suite no. 19, Plot no. 3a, udyog nagar, goregaon (w), mumbai - 400062 Tel +91 22 2876 2876 Fax +91 22 2876 3244 Email roofex@outlook.com

for more information visit our website www.realmindia.com

Made with FlippingBook Annual report