Min and Max Arm Reach Min and Max Arm Reach at Inclination
Max. Torque
Max Torque
Clamp
Max Tool Weight.
Models ATS-15 ATS-25 ATS-40 ATS-80
Item #
American
S.I.
Dia. 1 - 1 3/4" 1 - 2 1/4" 1 - 2 1/4"
0°
22.5°
45°
260600 260601 260602 260603
11 lbf.ft
15 N.m 25 N.m 40 N.m 80 N.m
19" - 23.6"
------
------
6.2 lbs
18.4 lbf.ft 29.5 lbf.ft
21" - 23.6" 23" - 29.2" 22" - 28.6"
20.7" - 21"
18" - 19.3"
5.5 lbs. 8.5 lbs.
25.2" - 28.4"
12.4" - 26.3"
59 lbf.ft
1 - 2 1/4"
17.8" - 28"
13.3" - 26"
11 lbs.
Note: The ATS-25, ATS-40 and ATS-80 models have 3 angle settings to help accommodate larger tools. Each ATS model includes tool balancers that are considered for the application 15, ATS-25 and ATS-80 use 2 balancers while the the 40 N.m range. 80 models have 3 angle settings to help accommodate larger tools. TS model includes tool balancers that are considered for the application of that particular model. The A 80 use 2 balancers while the ATS-40 uses 1 medium sized balancer optimized for tools in of that particular model. The ATS- uses 1 medium sized balancer optimized for tools in
Quality Materials:
The arm's column (pole) is steel with a polished chrome finish. steel with a polished chrome finish.
Tool balancers have an aluminum housing and braided cable for durability. Load adjustability can be easily made by turning the knob clockwise for lighter loads and counterclockwise for heavier loads. The balancers have a locking mechanism to prevent injury. The average loads of tools, cables, and bits delivering up to the maximum torque for the arm. balancers have an aluminum housing and braided cable for durability. Load adjustability can be easily have a locking mechanism to prevent injury. The balancers included take into account the load of the arm and balancers included take into account the load of the arm and
ATS-15 model
The arm's support slider is made of industrial torque applications, and features integrated steel bearings. The arm's support slider is made of industrial-grade thermoplastic for optimized weight and
grade thermoplastic for optimized weight and durability in lower-
The Mountz articulated arm is made of 7000
is made of 7000-series aluminum with a thermoplastic hinge a thermoplastic hinge.
ATS-25/40/80 models
The arm's support slider is made of aluminum with steel movement. The arm's support slider is made of aluminum with steel bearings, providing smooth and
long-lasting vertical
The articulated arms are made of 7000 the strength-to-weight ratio, increase the arm's torsional strength
7000-series aluminum wrapped in multi-directional carbon fiber to enhance se the arm's torsional strength and minimize the transfer of torsional forces. directional carbon fiber to enhance ransfer of torsional forces.
Tool Balancer
Access More Information
Arm Support Slider
Articulated arm
Torque Arm Comparison Chart
Watch Video
Shop Now
Note: Workbench mounting hardware is not included included
Column (pole)
mountztorque.com (408) 292-2214
Made with FlippingBook Digital Publishing Software