Min and Max Arm Reach Min and Max Arm Reach at Inclination
Max. Torque
Max Torque
Clamp
Max Tool Weight.
Models
Item #
0°
22.5°
45°
American
S.I.
Dia.
ATS-15 ATS-25 ATS-40 ATS-80
260600 260600 260602 260603
11 lbf.ft
15 15 N.m 25 N.m 40 N.m 80 N.m
1 - 1 3/4"
19" - 23.6"
------
------
6.2 lbs
18.4 lbf.ft 29.5 lbf.ft
1 - 2 1/4" 1 - 2 1/4" 1 - 2 1/4"
21" - 23.6" 23" - 29.2" 22" - 28.6"
20.7" - 21"
18" - 19.3"
5.5 lbs. 8.5 lbs.
25.2" - 28.4"
12.4" - 26.3"
59 lbf.ft
17.8" - 28"
13.3" - 26"
11 lbs.
Note: The ATS-25, ATS-40 and ATS-80 models have 3 angle settings to help accommodate larger tools. Each ATS model includes tool balancers that are considered for the application of 15, ATS-25 and ATS-80 use 2 balancers while the ATS the 40 N.m range. 80 models have 3 angle settings to help accommodate larger tools. Each ATS model includes tool balancers that are considered for the application of that particular model. The ATS 80 use 2 balancers while the ATS-40 uses 1 medium sized balancer optimized for tools in that particular model. The ATS- 40 uses 1 medium sized balancer optimized for tools in
Quality Materials:
The arm's column (pole) is steel with a polished chrome finish. steel with a polished chrome finish.
Tool balancers have an aluminum housing and braided cable for durability. Load adjustability can be easily made by turning the knob clockwise for lighter loads and counterclockwise for heavier loads. The balancers have a locking mechanism to prevent injury. The average loads of tools, cables, and bits delivering up to the maximum torque for the arm. balancers have an aluminum housing and braided cable for durability. Load adjustability can be easily have a locking mechanism to prevent injury. The balancers included take into account the load of the arm and balancers included take into account the load of the arm and
ATS-15 model
The arm's support slider is industrial- torque application and integrated steel bearings.
-grade thermoplastic for optimized weight and durabil grade thermoplastic for optimized weight and durability for the lower
The Mountz articulated arm is 7000-series
series aluminum with a thermoplastic hinge.
ATS-25/40/80 models
The arm's support slider is aluminum with steel bearings, creating a smooth and long movement.
s support slider is aluminum with steel bearings, creating a smooth and long-lasting vertical asting vertical
The Mountz articulated arms are 7000 the strength-to-weight ratio, increase the arm's torsional strength
articulated arms are 7000-series aluminum wrapped in multi-directional carbon fiber to enhance se the arm's torsional strength and minimize the transfer of torsional forces. directional carbon fiber to enhance and minimize the transfer of torsional forces.
Tool Balancer
Access More Information
Arm Support Slider
Articulated arm
Torque Arm Comparison Chart
Watch Video
Shop Now
Note: Workbench mounting hardware is not included
Column (pole)
1080 North 11th Street, San Jose, CA 95112 | Phone: (408) 292 SILICON VALLEY HEADQUARTERS 1080 North 11th Street, San Jose, CA 95112 | Phone: (408) 292-2214 | Fax: (408) 292-2733 | mountztorque.com mountztorque.com
Made with FlippingBook - Online catalogs