Max. Torque American
Max Torque
Clamp
Min Arm
Max Arm
Max Tool
Models
Item #
Height
S.I.
Dia.
Reach 12.7" 12.7 17.8 17.8" 20.8" 19.5"
Reach 19.7" 30.6" 32.9" 31.5"
Weight.
LTS-15 LTS-25 LTS-40 LTS-80
260604 260605 260606 260607
30.6" 39.1" 39.1" 43.8"
11 lbf.ft
15 N.m 25 N.m 40 N.m 80 N.m
1 - 1 3/4"
2.9 lbs. 5.5 lbs. 7.7 lbs.
18.4 lbf.ft 29.5 lbf.ft
1 - 2 1/4" 1 - 2 1/4" 1 - 2 1/4"
59 lbf.ft
12 lbs.
Note: Each LTS model includes tool balancers that are considered for the application of that particular model. The LTS-15, LTS-25 and LTS-80 use 2 balancers while the LTS tools in the 40 N.m range. includes tool balancers that are considered for the application of that particular model. 80 use 2 balancers while the LTS-40 uses 1 medium sized balancer optimized for 40 uses 1 medium sized balancer optimized for
Quality Materials:
The arm's column (pole) is steel with a polished chrome finish. steel with a polished chrome finish.
Tool balancers have an aluminum housing and braided cable for durability. Load adjustability can be easily made by turning the knob clockwise for lighter loads and counterclockwise for heavier loads. T have a locking mechanism to prevent injury. The balancers included take into account the load of the arm and average loads of tools, cables, and bits delivering up to the maximum torque for the arm. made by turning the knob clockwise for lighter loads and counterclockwise for heavier loads. The balancers
LTS-15 model
The arm's support slider is industrial- torque application and integrated steel bearings.
-grade thermoplastic for optimized weight and durability for the lower grade thermoplastic for optimized weight and durability for the lower
The Mountz linear arm is 7000-series aluminum with polished chrome steel sliding rods and thermoplastic housed steel bearings. series aluminum with polished chrome steel sliding rods and thermoplastic
LTS-25/40/80 models
The arm's support slider is aluminum with steel bearings, creating a smooth and long movement.
s support slider is aluminum with steel bearings, creating a smooth and long-lasting vertical lasting vertical
The Mountz linear arms are 7000-series aluminum with polished chrome steel sliding rods and steel bearings. series aluminum with polished chrome steel sliding rods and steel bearings.
Access More Information
Tool Balancer
Shop Now
Arm Support Slider
Watch Video
Linear arm
Torque Arm Comparison Chart
Note: Workbench mounting hardware is not included
Column (pole)
1080 North 11th Street, San Jose, CA 95112 | Phone: (408) SILICON VALLEY HEADQUARTERS 1080 North 11th Street, San Jose, CA 95112 | Phone: (408) 292-2214 | Fax: (408) 292-2733 | mountztorque.com mountztorque.com
Made with FlippingBook - Online catalogs