Explore the full range of TYGRIS MRO products.
Explore the full range of TYGRIS MRO products. For data sheets or more information visit: TYGRISINDUSTRIAL.COM MRO BROCHURE Reduce Downtime, Increase Efficiency
+44 (0) 1294 311 066
team101@tygrisindustrial.com
1
Contents
3
Cleaners
11
Lubricants
24 37 43 52 54 56 59 62
Protecting & Finishing
Speciality Lubricants
Industrial Lubricants
Metal Working & Fabrication
Anti-Corrosion Fluids
Anti-Sieze Compounds
Industrial Cleaners & Degreasers
Greasing Equipment
tygrisindustrial.com
2
Dashboard Renovator
TYGRIS Dashboard Renovator is a light duty, pleasantly fragranced cleaner and polish for internal plastics and trim in automotive applications. It cleans and shines dashboards, fascias and other interior panels, restoring to original appearance without the need for manual buffing. It is fast acting with nearly instantaneous evaporation.
BENEFITS:
• Silicone based for good cleaning and finish • Easy to use, no buffing required • Restores original appearance • Fast acting and evaporation • Pleasant fragrance
CHERRY
PRODUCT CODE SIZE R199 400ml
APPLE
PRODUCT CODE SIZE R200 400ml
CRANBERRY
PRODUCT CODE SIZE R205 400ml
Carburettor Cleaner
TYGRIS R201 is a strong solvent based cleaner used for the removal of oil, grease and stubborn gum deposits from carburettors and injection systems. Suitable also for cleaning brake parts and automatic chokes without dismantling in order to prevent stalling and to smooth out rough idling.
BENEFITS:
• Strong solvent for stubborn deposits • Dissolves grease and oil • Helps to restore engine performance
• Removes combustion deposits from nail gun mechanisms • Safe for use with catalytic convertors and oxygen sensors.
PRODUCT CODE
SIZE
R201
400ml
+44 (0) 1294 311 066
team101@tygrisindustrial.com
3
Brake Cleaner
TYGRIS R202 is a powerful cleaning fluid used to remove oil, grease, dirt and dust from brakes and clutches, aiding in the elimination of brake squeal and clutch slip caused by glazing and contamination. Can be used on many other surfaces as a powerful cleaning agent.
BENEFITS:
• Colourless – non-staining • Fast evaporating solvents • Effective against grease, brake fluid, brake and clutch dust
• Can be used to remove tar spots from some surfaces • Eliminates brake squeal
PRODUCT CODE
SIZE
R202
400ml
Engine Degreaser
TYGRIS R203 is a powerful, heavy duty emulsifiable solvent degreaser and de-waxer which simply sprays on and washes off, quickly removing oil, grease and tar deposits from engines and other surfaces.
BENEFITS:
• Use on any metallic surface • Removes grease, tar stains, oil, bitumen, waxes etc. • Dissolves and emulsifies for easy removal
• Can be used on most plastic and painted surfaces • Suitable for spot removal on concrete
PRODUCT CODE
SIZE
R203
400ml
Dashboard Cleaner Non-Silicone
TYGRIS R270 is a light duty, perfumed cleaner and polish for internal plastic, wood and veneered trim in automotive applications. It cleans as well as shines dashboards, fascias, and other interior panels, restoring to original appearance without the need for manual buffing. It is fast acting with nearly instantaneous evaporation and, being silicone-free, can be used in areas where painting and re-finishing takes place.
BENEFITS:
• Silicone-free for use in areas where re-finishing takes place • Easy to use, no buffing required
• Restores original appearance • Fast acting and evaporation • Pleasant fragrance
PRODUCT CODE
SIZE
R270
400ml
tygrisindustrial.com
4
Brake Cleaner High Power
TYGRIS R274 is a high power spray cleaning fluid used to remove oil, grease, dirt and dust from brakes and clutches, aiding in the elimination of brake squeal and clutch slip caused by glazing and contamination. Can be used on many other surfaces as a powerful cleaning agent.
BENEFITS:
• Very powerful spray • Colourless – non-staining • Fast evaporating solvents • Effective against grease, brake fluid, brake and clutch dust
• Can be used to remove tar spots from some surfaces • Eliminates brake squeal
PRODUCT CODE
SIZE
R274
480ml
PRECISION Electro Clean TYGRIS IS20 is a very fast evaporating solvent cleaner for use on electrical components, making maintenance quick and safe on switchgear, fork lift electrics and where equipment will be used soon after this is carried out. Requiring no rinsing or cleaning off, grease and dirt are quickly and efficiently removed.
BENEFITS:
• Very fast evaporating • Non-conductive • Efficient removal of grease and dirt
• Requires no further processing • Safe on most plastics and painted surfaces
PRODUCT CODE
SIZE
IS20
400ml
PRECISION Mould & Tool Cleaner Xtra
TYGRIS IS25 effectively removes surface rust, grease and oil from injection moulds, dies and other metal components, with a fast-drying solvent which leaves no residue, for minimal down time. High powered spray effectively flushes debris from difficult to reach areas.
BENEFITS:
• Non-flammable CO2 propellant • Propellant mixes fully with product which means that the can contains a full 480ml of usable fluid • Fast evaporating
• High powered cleaning • Leaves no residue • Is also a very effective general purpose solvent cleaner
PRODUCT CODE
SIZE
IS25
480ml
+44 (0) 1294 311 066
team101@tygrisindustrial.com
5
PRECISION Mould & Tool Cleaner Supa
BENEFITS: TYGRIS IS27 is used for the removal of difficult to dislodge deposits on injection moulds and metal components. Slow evaporation means that it can be used on warm moulds and can be left to work before wiping off.
• Slow evaporating • Effectively removes difficult and burnt on deposits
• Works even on warm moulds where other solvents evaporate too quickly.
PRODUCT CODE
SIZE
IS27
480ml
Electrical Cleaner
TYGRIS R235 Electrical Cleaning Solvent is an alcohol based cleaning solvent designed for use in the electronics and switchgear industries and is suitable for cleaning most electrical apparatus. Safe to use with most plastics, it effectively cleans and degreases electrical contacts, circuit boards and print heads, leaving no residue.
BENEFITS:
• Powerful, effective cleaner Removes stains, coatings, printing aids, oil, grease, dirt and most fluxes • Leaves no residue • Controlled drying time
• Safe with most plastics and on delicate instruments • Does not cause corrosion of metals • Low toxicity
PRODUCT CODE
SIZE
R235
400ml
Industrial Cleaner Fast Drying TYGRIS R207 is a fast drying industrial cleaner which is used to break down grease, dirt, oil and other workshop contaminants quickly and easily without the need of subsequent rinsing, saving time and maintaining a clean environment.
BENEFITS:
• Powerful solvent cleaning • Breaks down workshop contaminants quickly • Solvent evaporates quickly, leaving a clean surface
• Non-chlorinated • No need for rinsing – leaves no residue.
PRODUCT CODE
SIZE
R207
400ml
tygrisindustrial.com
6
Circuit Freezer Spray Low GWP TYGRIS R240 is a rapid cooling agent used in a number of applications where lowering the temperature quickly is beneficial, including the detection of electronic equipment faults, working on small bore water pipes, and shrink fitting of close-tolerance metal parts. A non-flammable, inert, liquefied gas.
BENEFITS:
• F-GASES II (EC) REGULATION 517/2014 Compliant Product. Low GWP (Global Warming Potential) with NO ozone depletion potential • Rapidly cools components to freezing point • Detects faults in electronic circuits by reducing the temperature
• Use to shrink fit metal parts • Quickly freezes small bore pipes for safe working • Can be used to freeze gum – toffee – candle wax and other soft deposits
PRODUCT CODE
SIZE
R240
400ml
Micro Air Duster Low GWP BENEFITS: TYGRIS R241 is designed to physically remove dust, dirt and other loose- adhering contaminants, where the use the wet chemical products would be prohibited or impractical, TYGRIS R241 is suitable for use on electrical / electronic devices and equipment commonly found at home, work or play. Ideal for removing dust and debris from those hard-to-reach places.
• F-GASES II (EC) REGULATION 517/2014 Compliant Product • Low GWP (Global Warming Potential) with NO ozone depletion potential • Highly pressurised discharge for rapid and effective dust & debris removal
• Immediate evaporation • Extension nozzle for accurate application and accessing difficult-to-reach areas • Non-flamable
PRODUCT CODE
SIZE
R241
400ml
Glass & Mirror Cleaner
TYGRIS R244 is a specially formulated aqueous, alcohol based cleaner which gives streak free cleaning of glass and mirrors, plastic, stainless steel and chrome. It is powerful enough to remove nicotine, finger marks, insects, lipstick and much more, making it ideal for car valeters, hospitals, hotels, airports, jewellers, window installers and cleaning contractors.
BENEFITS:
• Dries streak-free • Effective cleaning & degreasing • Fast acting • Low foaming • Virtually residue free • Abrasive free
• Safe for use on all glass and plastic surfaces • High level of detergency – will remove hair spray deposits, lipstick, nicotine etc.
PRODUCT CODE
SIZE
R244
400ml
+44 (0) 1294 311 066
team101@tygrisindustrial.com
7
Anti-Static Foaming Cleaner TYGRIS R245 is a foaming action cleaner designed for use around the workplace where the build up of dust is undesirable, its anti-static properties dissipate static electrical charges effectively. For use on all water resistant, non porous surfaces, the foaming action aids in clinging to vertical surfaces.
BENEFITS:
• Dissolves grease and grime • Foaming action for use on vertical surfaces • Minimises wetting on fabrics • Residual anti-static effect
• For use on most surfaces including plastics • Streak free finish • Lemon fragrance
PRODUCT CODE
SIZE
R245
400ml
Air Freshener Cranberry
TYGRIS R248 is a powerful action air freshener that clears unwanted odours and leaves a long-lasting freshness to large and small areas. Its dry formulation makes it safe for use in the home and is ideal for hospitals, care homes, changing rooms and community centres.
BENEFITS:
• Powerful deodoriser • Use in large and small areas
• Dry formulation • Long lasting
PRODUCT CODE
SIZE
R248
400ml
Graffiti Remover
TYGRIS R251 is a powerful solvent and wetting agent based formulation making the removal of unwanted markings quick and effective, with minimal effect on the substrate. Will remove graffiti from plastics, wood, metal, glass, and most painted surfaces.
BENEFITS:
• Use on a wide range of surfaces including many plastics • Wetting agents make for effective penetration
• Methylene Chloride free • Easy to apply • Rapid penetration • Fast drying
PRODUCT CODE
SIZE
R251
400ml
tygrisindustrial.com
8
Graffiti Remover Viscous TYGRIS R252 – This thickened powerful graffiti remover is effective in the removal of paint graffiti, ink and felt tip, particularly on vertical surfaces or areas where the slow evaporation aids in penetration for erasure of unwanted marks.
BENEFITS:
• Thixotropic to aid in clinging to vertical surfaces • Water washable • Slow drying for better penetration • Removes paint, biro, felt tip pen
• Easily applied • Non-chlorinated • Also effective in the removal of old gaskets.
PRODUCT CODE
SIZE
R252
400ml
Ink & Gum Remover Citrus Based
TYGRIS R255 is an effective means of removing old and stubborn ink marks and gum deposits, leaving a pleasant citrus smell.
BENEFITS:
• Reasonably fast evaporation rate • Leaves no residue • Effective in delicate applications • May also be used for heavier duty cleaning
• Easy to use with integral directional nozzle • Removes stains, oil, grease, and printing inks.
PRODUCT CODE
SIZE
R255
400ml
Stainless Steel Cleaner
BENEFITS: TYGRIS R258 maintains a sparkling appearance to stainless steel, chrome and aluminium surfaces. Its non-abrasive formulation cleans without scratching, leaving a protective film to aid in future maintenance.
• Non-abrasive – leaves no scratches • Effective on stainless steel, chrome and aluminium • Use on supermarket checkouts, window surrounds and kitchen equipment (not including food preparation surfaces)
• Removes grease • Inert composition, acid and alkali free • Silicone free • Leaves a protective clear film • Lemon fragrance
PRODUCT CODE
SIZE
R258
400ml
+44 (0) 1294 311 066
team101@tygrisindustrial.com
9
Super Power Air Freshener Cranberry
TYGRIS R261 is a powerful room air freshener that will counter unpleasant odours across large areas, replacing them with a fresh and pleasant aroma. Its extra power nozzle propels the product over a significant distance.
BENEFITS:
• High power nozzle for extra propulsion • Pleasant cranberry aroma • Dry formulation for use in healthcare,
community, leisure and commercial locations.
PRODUCT CODE
SIZE
R261
750ml
Sticky Label Remover
TYGRIS R267 is a solvent based blend for the removal of sticky labels from most substrates including many plastics, metals, rubbers, painted surfaces and other impervious materials, leaving no residue or markings.
BENEFITS:
• Dissolves gums and adhesives from self adhesive labels • Suitable for most surfaces
• Leaves no residues • High penetrating power
PRODUCT CODE
SIZE
R267
400ml
tygrisindustrial.com
10
Lubricants Who doesn’t love a smooth operation? Here at TYGRIS, we take pride in providing industries with powerful solutions, and our range of industrial greases and lubricants give the best results, even in extreme conditions.
+44 (0) 1294 311 066
team101@tygrisindustrial.com
11
PRECISION Looz-n-It Penetrating Oil
TYGRIS IS1 is a premium release fluid providing a powerful penetrating action which releases and lubricates metal components which have seized through corrosion, remaining effective even under water. Giving effective penetration and lubrication without damaging paintwork, it also actively displaces moisture and does not dry off.
BENEFITS:
• Fast penetration of rust and corrosion deposits • Works effectively in wet and
• Displaces moisture • Excellent lubrication properties • Cleans and degreases • Removes moisture from ignition systems
PRODUCT CODE damp conditions • Water repellent
SIZE
IS1
400ml
PRECISION Mould Release Medium
TYGRIS IS5 contains a special blend of 10% silicone and PTFE, resulting in a very effective, proven mould release agent for the Plastic Injection Moulding Industry. Being colourless, it is non-staining and is heat stable up to 300°C.
BENEFITS:
• 10% silicone • Added PTFE for an effective release agent increasing the number of releases • No other additives
• Maximum surface slip • Colourless and non-marking
• Virtually odourless • Stable up to 300°C
PRODUCT CODE
SIZE
IS5
400ml
tygrisindustrial.com
12
PRECISION Mould Release Light
TYGRIS IS9 Mould Release is ideal for the release of delicate plastic mouldings. This is particularly useful where marking of the plastic might otherwise occur. Used to give fine and lasting lubrication in a wide range of industrial applications, it is stable up to 300°C.
BENEFITS:
• 8% silicone – for delicate and small mouldings • No other additives • Good flow properties
• Colourless and non-marking • Safe and odourless • Gives lasting lubrication • Heat stable up to 300°C
PRODUCT CODE
SIZE
IS9
400ml
PRECISION Mould Release Heavy
TYGRIS IS10 is a heavy duty mould release agent with a 15% silicone content used for the release of more difficult plastic mouldings. Safe, colourless and non-staining it is useful as a lubricant around the workplace, and is temperature stable up to 300°C.
BENEFITS:
• 15% silicone content – for larger mouldings • Excellent release properties • Very high surface slip
• Colourless and non-marking • Odourless and inoffensive • Effective as a general lubricant • Heat stable up to 300°C
PRODUCT CODE
SIZE
IS10
400ml
PRECISION Mould Release Non-Silicone BENEFITS: TYGRIS IS13 is an excellent alternative to silicone spray for use in the Plastic Moulding industry. It is a quick drying solvent and oil blend with a vegetable oil base, stable up to 220°C. It is non-chlorinated and is easily removed by ordinary washing, facilitating further product finishing.
• Non-silicone content to allow for overpainting - lacquering - overprinting - gluing or welding; • Effective where a high gloss finish is desirable;
• Quick drying; • Easily cleaned off with conventional detergents
PRODUCT CODE
SIZE
IS13
400ml
+44 (0) 1294 311 066
team101@tygrisindustrial.com
13
PRECISION Ceramic Release Agent
PRECISION Ceramic Release Agent is a ceramic / boron nitride spray for use as a dry film protective coating on MIG welding torches, jigs, fittings and cables etc to prevent the adhesion of welding spatter. Also used as an excellent lubricant on moulds and dies used in aluminium extrusion processes.
BENEFITS:
• Effective up to 1100°C • Water and acid resistant • Use on a wide range of metals • Prevents seizure of threaded parts • Will not burn or wash off
• Eliminates brake squeal • Assists in assembly and disassembly of components
PRODUCT CODE
SIZE
IS35
400ml
PRECISION Clear Forklift Chain Lubricant
TYGRIS IS75 is a premium-grade oil based product that gives clear lubrication to chains and other moving parts where a dark coloured lubricant would be undesirable. Its anti-fling properties make it very effective when used on moving parts, penetrating into the mechanism and depositing a film of extreme pressure additives which will withstand pressure washing.
BENEFITS:
• Clear, non-staining • Extreme pressure additives for heavy use • Effective on fork lift chains, sprockets, pins and bushes
• Tenacious – will not fling off • Penetrates deeply • Withstands pressure washing • 150°C Continuous – 300°C Intermittent
PRODUCT CODE
SIZE
IS75
400ml
Metal Working Spray
BENEFITS: TYGRIS R208 Metal Working Spray has been developed specifically to meet the cutting lubrication demands of harder metals such as stainless steel. Its enhanced extreme pressure additives and non-solvent, high mineral oil contents make R208 a consistently high performing lubricant which cools and penetrates to enable a clean cutting action and increase tool life.
• Proven performance on stainless steel • Fast flowing and penetrating formula • Enhanced extreme pressure additives • Solvent free • Developed for hard materials
• Suitable for cutting, tapping, drilling and reaming • Reduces heat build up • Prolongs tool life and improves machined finish
PRODUCT CODE
SIZE
R208
400ml
tygrisindustrial.com
14
Graphite Penetrating Oil A graphite reinforced penetrating fluid, designed for use in semi- hostile environments, lubricating in temperatures of up to 150°C, and penetrating to free seized and corroded metallic components. The presence of micronized graphite particles provides extended lubrication intervals and is also useful for anti seize applications.
BENEFITS:
• Contains micronized graphite particles • Enhanced load bearing performance • Good anti-scuff properties • Fast penetration of rust
• Higher temperature range than conventional oils • Excellent for freeing seized and corroded parts • Leaves a residual lubricating film.
PRODUCT CODE
SIZE
R209
400ml
Clear Fine Oil
TYGRIS R211 is a general purpose, light duty lubricant and penetrant designed to release seized components and lubricate small, delicate mechanisms.
BENEFITS:
• Releases seized and rusted parts • Effective on small and delicate components • Rapid penetrating action
• Use on metallic components • Low viscosity
PRODUCT CODE
SIZE
R211
400ml
Clear Penetrating Oil
TYGRIS R212 is a clear ‘low-viscosity’ oil based product used to aid the removal and freeing of seized nuts and bolts, hinges, locks, tools and fittings with a fast penetrating capillary action. Leaves a clear protective film to guard against further corrosion.
BENEFITS:
• Low viscosity for maximum penetration • Easy to apply and works quickly • De-watering capability
• Leaves a protective film against corrosion • Also suitable for light lubrication duties
PRODUCT CODE
SIZE
R212
400ml
+44 (0) 1294 311 066
team101@tygrisindustrial.com
15
Water Displacing Anti-Rust Agent
TYGRIS R213 is a high performance water displacement spray which actively drives out moisture, even from hard-to-reach areas, leaving a fine lubricating film which protects against corrosion. This film enables future dismantling of equipment. Also an effective cleaner and degreaser.
BENEFITS:
• Silicone free • Powerful water displacement properties • Leaves a shield against further moisture ingress
• Leaves a protective film, guarding against corrosion • Good general lubrication for most components • A rapid penetrant for seized fixings
PRODUCT CODE
SIZE
R213
400ml
Cutting & Tapping Fluid
TYGRIS R214 is a ready to use cutting and tapping fluid specially formulated to improve tool performance and extend tool life. It contains additives to prevent pitting, galling and metal seizure and is suitable for use on hard to work metals including stainless steel, titanium, aluminium and tool steel.
BENEFITS:
• For cutting, tapping, reaming and turning • Extreme pressure additives for difficult materials • High pressure, frothy discharge to aid penetration
• Prolongs tool life and improves machined finish • Reduces heat build up • Suitable for use on all metals • Incorporates corrosion inhibitors
PRODUCT CODE
SIZE
R214
400ml
tygrisindustrial.com
16
Open Gear Lubricant
TYGRIS R216 is a bituminous reinforced heavy duty lubricant formulated to protect and lubricate exposed gears, wire ropes and other moving parts. Exceptional penetrating and water resistance properties make it ideal for situations where exposure to weather is experienced and its tenacity resists throwing off during use.
BENEFITS:
• Highly resistant to throw off • Water resistant for use in adverse weather conditions • Good penetrating qualities • Excellent lubricating power
• High pressure foaming discharge imparts excellent penetrative power • Protects against corrosion, wear and salt • Resistant to embrittlement over long usage
PRODUCT CODE
SIZE
R216
400ml
Silicone Lubricant
BENEFITS: TYGRIS R217 provides clean, low odour, non-staining lubrication for many applications, especially plastic parts and seals. Non-toxic in character.
• Excellent lubricating properties • Non-staining, low odour • Effective on plastic, metal, wood, vinyl, rubber and other surfaces • Non-toxic in character. • Used for mould release in the plastics industry • An effective surface polish
• Use on seals, slides, bearings, textile equipment etc. • High temperature stability up to 200°C • Water repellent
PRODUCT CODE
SIZE
R217
400ml
Moly Dry Film Lubricant
TYGRIS R218 is a molybdenum disulphide based lubricant for use where conventional wet oils would be undesirable. Particularly suitable for the assembly and running-in of gears, bearings, spindles and valves, it is effective for use where high temperatures occur, drying to a tough, matt black high slip coating.
BENEFITS:
• Dry Lubricant – does not attract dirt • Durable coating • Outstanding adhesion • Extended service life
• Withstands high loads • Working temperature to at least 350°C • Water and chemical resistant • Anti static properties
PRODUCT CODE
SIZE
R218
400ml
+44 (0) 1294 311 066
team101@tygrisindustrial.com
17
Food Safe Lubricant
TYGRIS R219 is a vegetable oil based lubricant, H1-approved for use in and around food processing areas where incidental food contact may occur. It is odourless, colourless, contains anti-throw additives and is formulated to penetrate cable cores.
BENEFITS:
• NSF: H1 registered for use in food environments • No animal derivatives • Silicone free • Odourless, colourless and non-staining • Penetrates cable cores
• Anti-throw properties for moving chains • Use on chains, slides, gears and linkages etc. • 180°C Continuous – 200°C Intermittent
PRODUCT CODE
SIZE
R219
400ml
Chain & Wire Lubricant
BENEFITS: TYGRIS R220 is a heavy duty, additive-reinforced lubricant which penetrates deeply into drive chains and wire ropes to give long lasting lubrication, preventing corrosion, wear and chain elongation. It gives outstanding performance under extreme load and is resistant to fling off.
• Use on chain blocks, drive chains, fork lift chains and wire ropes • Extreme pressure additives for heavy loads • Excellent lubrication properties
• Resistant to flinging off • Penetrates deeply • Only a thin film is left on the surface for corrosion prevention • High resistance to wash off
PRODUCT CODE
SIZE
R220
400ml
Weld Spatter Release Spray Solvent Based TYGRIS R221 is a special non-silicone formulation ideal for use on all types of welding equipment to prevent the adhesion of welding spatter. It can be applied to workpieces, nozzles, shrouds, jigs and tools and enables free gas flow in inert gas welding.
BENEFITS:
• Non-silicone – can be used with products that require finishing • Rapid drying • Prevents adhesion – spatter easily removed
• Colourless – non-staining • Does not gum up when subject to heat • Non-flammable for maximum safety
PRODUCT CODE
SIZE
R221
300ml
tygrisindustrial.com
18
Weld Spatter Release Spray Water Based TYGRIS R222 is a water based solvent-free formulation for use on all types of welding equipment to prevent the adhesion of welding spatter. It can be applied to workpieces, nozzles, shrouds, jigs and tools. Its water based properties offer an environmentally friendly alternative to solvent based varieties.
BENEFITS:
• Prevents spatter adhesion • Non-silicone – can be used with products that require finishing • Excellent non-stick finish
• Non-flammable • Water rinseable • Dichloromethane free
PRODUCT CODE
SIZE
R222
400ml
White Grease
TYGRIS R223 is a premium quality anhydrous calcium based grease for use in applications requiring good water resistance. For use in anti-friction and plain bearing pumping equipment and in the lubrication of linkages, door latches, hinges, gears, springs, bearings, rubber components, ‘O’ rings, striker plates and sliding shackles.
BENEFITS:
• High water resistance for marine use • Prevents corrosion in humid conditions • Prevention of seizure
• Good mechanical stability • Wide temperature Range from -20°C to 110°C
PRODUCT CODE
SIZE
R223
400ml
Non-Silicone Mould Release BENEFITS: TYGRIS R225 is a non-silicone release agent for use in the Plastic Moulding industry, where further finishing processes are to be carried out. With a non-chlorinated, solvent-free vegetable oil base, it is stable up to a temperature of 200°C. Conventional detergents easily remove any residue of this benign, non-toxic agent, allowing for further product finishing.
• Non-silicone content to allow for overpainting, lacquering, overprinting, gluing or welding • Excellent surface slip
• Effective where a high gloss finish is desirable • Easily removed by conventional detergents
PRODUCT CODE
SIZE
R225
400ml
+44 (0) 1294 311 066
team101@tygrisindustrial.com
19
Clear Grease
TYGRIS R226 is used on chains and moving metal parts. This high performance grease penetrates rapidly before thickening to a tenacious grease which is highly resistant to throw off. The addition of extreme- pressure additives makes it particularly effective under heavy loads.
BENEFITS:
• Clear, non-staining • Penetrates rapidly and thickens • Extreme-pressure additives for high loadings
• Highly resistant to throw-off • Use on chains and other moving parts
PRODUCT CODE
SIZE
R226
400ml
Clear Polymer Chain Lubricant BENEFITS: TYGRIS R228 is a clear, polymer based lubricant which is used on chains and sprockets, pins and bushes where its anti-fling performance is important and where a clear invisible film is necessary for cosmetic reasons. It penetrates into the chain, depositing a film of extreme pressure additives and polymers which will withstand pressure washing.
• Fortified with PTFE for improved load resistance • Extends chain life • Resists and prevents corrosion
• Clean to use • Penetrates deep into chain links • 150°C Continuous – 300°C Intermittent
PRODUCT CODE
SIZE
R228
400ml
Drive & Bearing Lubricant TYGRIS R229 is an effective lubricant for the lubrication of chains, bearings and wire ropes. Containing extreme pressure and anti-fling additives, this enhances chain and rope life whilst having minimal effect on rubber O-rings and components, and can be used at a wide range of temperatures.
BENEFITS:
• Anti-fling properties for moving chains • Extreme pressure additives for long arduous service • Not aggressive to rubber parts • Wide temperature change
• Use on drive chains, wire ropes and bearings • 100°C Continuous – 150°C Intermittent
PRODUCT CODE
SIZE
R229
400ml
tygrisindustrial.com
20
Clear Silicone Grease
TYGRIS R230 is waterproof silicone based grease which is very effective for the insulation of electrical components and parts as well as being an excellent sealant against moisture. Ideal for use on rubber seals and many other exterior applications.
BENEFITS:
• Effective moisture resistance • Preserves rubber components • Clear formulation • Good electrical insulating properties
• Can be used for parts assembly and disassembly • 80°C Continuous – 150°C Intermittent
PRODUCT CODE
SIZE
R230
400ml
Super Lube Extreme Pressure TYGRIS R232 is a lubricant with excellent penetrating properties. De-waters, lubricates, releases and protects.
BENEFITS:
• Extreme pressure additives • 60°C Continuous – 80°C Intermittent • De-watering additives
• Effective penetration and release • Contains corrosion inhibitors
PRODUCT CODE
SIZE
R232
400ml
Aluminium Anti-Seize
TYGRIS R233 is a high temperature multi purpose blend of heat stable lubricant and anti-seize compound used in a wide range of automotive, industrial, marine and construction applications, helping to eliminate seizure, pitting and rusting of components exposed to heat. Use on threaded components, flanges, chains and locks to facilitate in future dismantling.
BENEFITS:
• Assists in easy dismantling of threaded parts • Effective lubrication at ambient temperatures • High temperature resistance to melting
• Use also on flanges, chains and locks • Facilitates easy re-use of dismantled components • Temp. range: -30°C to +275°C • Prevention of seizure
PRODUCT CODE
SIZE
R233
400ml
+44 (0) 1294 311 066
team101@tygrisindustrial.com
21
Copper Anti-Seize Advanced TYGRIS R234 is a high temperature lubricant providing outstanding overall metal protection against heat, rust, seizure and corrosion. Resistance to water and acids is high and it will not burn off under extreme stress. For use on threaded components, pins, valve stems in a range of materials including austenitic stainless steel. Used on brake callipers and the back of brake pads it will help eliminate brake squeal.
BENEFITS:
• Effective up to 1100°C • Water and acid resistant • Use on a wide range of metals • Prevents seizure of threaded parts
• Will not burn or wash off • Eliminates brake squeal • Assists in assembly and disassembly of components
PRODUCT CODE
SIZE
R234
400ml
Leak Detector
TYGRIS R236 is an inoffensive, non-corrosive foam used in the inspection of pipework to prevent leaks passing unnoticed with potentially dangerous effects. It will detect any leaks instantly and is harmless to most materials as well as being safe to use with most gases.
BENEFITS:
• Non-flammable water based • Completely inert • Will detect the smallest leaks • Will not form combustible mixture with other gases • Can be used with oxy-acetylene and LPG gases • Non-corrosive
• Nitrogen propellant • Easily removed – completely water soluble • Temp. range: -20°C to +200°C • Conforms to BS EN ISO 14921 EU Regulations for use in Department of Transport testing stations
PRODUCT CODE
SIZE
R236
300ml
PTFE Dry Film Lubricant TYGRIS R237 is an effective dry film non-staining lubricant for use where wet oils would be undesirable. For use in the assembly of metal components and the lubrication of machine slides, cams and cutting shears in engineering applications.
BENEFITS:
• PTFE dry film for very low friction • Durable coating • Non-toxic – completely inert • Anti-static • High working temperature up to 275°C
• Withstands low temperatures • Water and chemical resistant • Rapid drying • Non-greasy dry film – does not attract dirt.
PRODUCT CODE
SIZE
R237
400ml
tygrisindustrial.com
22
Wax Chain Lube
TYGRIS R273 is a high performance lubricant particularly suited for motorcycle chains. It protects against corrosion and wear and its tenacious formulation forms a water-resistant film which is easy to apply and gives long-lasting protection. The lubricant is sprayed in a semi-liquid form, thereby penetrating the chain links and subsequently thickens to a waxy consistency which is not sticky. This ensures that road dirt does not adhere, reducing wear dramatically when compared to polymer chain lubricants.
BENEFITS:
• Highly tenacious-resistant to flinging off • Protects against rust and wear
• Resistant to adherence of dirt • Penetrates easily, then thickens • Water resistant
PRODUCT CODE
SIZE
R273
400ml
Seize Release Penetrating Oil TYGRIS R275 Seize Release is an advanced formulation of Penetrating Oil with a shock freeze action which rapidly freezes seized components, causing micro-cracks in rust layers, and allowing rapid penetration of the lubricant.
BENEFITS:
• Tested to -31°C creating a shock effect, allowing active lubricant to penetrate • Reduces costs through time saving
• 360° Spray system for all angle use • Does not contain silicones • Safe for use on most materials
PRODUCT CODE
SIZE
R275
400ml
+44 (0) 1294 311 066
team101@tygrisindustrial.com
23
Protecting & Finishing Getting the best possible finished product is never easier than with TYGRIS. Our range of protecting and finishing products allows for a professional grade look, that helps guard against corrosion and moisture.
tygrisindustrial.com
24
Stripeline Marking Paint
TYGRIS Line Marker is a solvent based paint used for applying semi- permanent markings to most hard surfaces, inside or outside. Used inverted with a hand held or wheeled applicator, this paint is rapid drying
and has good resistance to abrasion and chemicals. Available in 7 colours for safety and legal purposes.
BENEFITS:
• Easy to apply by hand or applicator • Fast drying • Lead and xylene free • High opacity • Anti-clogging nozzle
• UV-stable • Excellent abrasion and chemical resistance • Compatible with most applicators • 7 colours available
BLUE
PRODUCT CODE
SIZE
LMBE
750ml
BLACK
PRODUCT CODE
SIZE
LMBK
750ml
GREEN
PRODUCT CODE
SIZE
LMGN
750ml
ORANGE
PRODUCT CODE
SIZE
LMOE
750ml
RED
PRODUCT CODE
SIZE
LMRD
750ml
WHITE
PRODUCT CODE
SIZE
LMW
750ml
YELLOW
PRODUCT CODE
SIZE
LMY
750ml
+44 (0) 1294 311 066
team101@tygrisindustrial.com
25
Matt Black Paint RAL9005 TYGRIS Acrylic-based top-coat paints and primers can be used for a professional finish on most substrates with exceptional ease of use, resulting in a high quality appearance.
BENEFITS:
• Acrylic formulation for greater flexibility
• Gives excellent adhesion • High opacity • Lead Free • Excellent UV stability
• Compatible with most materials • Can be applied over previously painted surfaces
PRODUCT CODE
SIZE
P300
400ml
Satin Black Paint RAL9005 TYGRIS Acrylic-based top-coat paints and primers can be used for a professional finish on most substrates with exceptional ease of use, resulting in a high quality appearance.
BENEFITS:
• Acrylic formulation for greater flexibility
• Gives excellent adhesion • High opacity • Lead Free • Excellent UV stability
• Compatible with most materials • Can be applied over previously painted surfaces
PRODUCT CODE
SIZE
P301
400ml
Gloss Black Paint RAL9005 TYGRIS Acrylic-based top-coat paints and primers can be used for a professional finish on most substrates with exceptional ease of use, resulting in a high quality appearance.
BENEFITS: • Acrylic formulation for greater flexibility
• Gives excellent adhesion • High opacity • Lead Free • Excellent UV stability
• Compatible with most materials • Can be applied over previously painted surfaces
PRODUCT CODE
SIZE
P302
400ml
tygrisindustrial.com
26
Grey Primer Paint TYGRIS Acrylic-based top-coat paints and primers can be used for a professional finish on most substrates with exceptional ease of use, resulting in a high quality appearance.
BENEFITS:
• Acrylic formulation fo greater flexibility
• Gives excellent adhesion • High opacity • Lead Free • Excellent UV stability
• Compatible with most materials • Can be applied over previously painted surfaces
PRODUCT CODE
SIZE
P303
400ml
White Primer Paint TYGRIS Acrylic-based top-coat paints and primers can be used for a professional finish on most substrates with exceptional ease of use, resulting in a high quality appearance.
BENEFITS: • Acrylic formulation for greater flexibility
• Gives excellent adhesion • High opacity • Lead Free • Excellent UV stability
• Compatible with most materials • Can be applied over previously painted surfaces
PRODUCT CODE
SIZE
P304
400ml
Red Primer Paint TYGRIS Acrylic-based top-coat paints and primers can be used for a professional finish on most substrates with exceptional ease of use, resulting in a high quality appearance.
BENEFITS: • Acrylic formulation for greater flexibility
• Gives excellent adhesion • High opacity • Lead Free • Excellent UV stability
• Compatible with most materials • Can be applied over previously painted surfaces
PRODUCT CODE
SIZE
P305
400ml
+44 (0) 1294 311 066
team101@tygrisindustrial.com
27
Gloss White Paint RAL9010 TYGRIS Acrylic-based top-coat paints and primers can be used for a professional finish on most substrates with exceptional ease of use, resulting in a high quality appearance.
BENEFITS:
• Acrylic formulation for greater flexibility
• Gives excellent adhesion • High opacity • Lead Free • Excellent UV stability
• Compatible with most materials • Can be applied over previously painted surfaces
PRODUCT CODE
SIZE
P306
400ml
Bright Silver Paint RAL9006 TYGRIS Acrylic-based top-coat paints and primers can be used for a professional finish on most substrates with exceptional ease of use, resulting in a high quality appearance.
BENEFITS:
• Acrylic formulation for greater flexibility
• Gives excellent adhesion • High opacity • Lead Free • Excellent UV stability
• Compatible with most materials • Can be applied over previously painted surfaces
PRODUCT CODE
SIZE
P307
400ml
Black Primer Paint TYGRIS Acrylic-based paint and primer can be used for a professional finish on most substrates with exceptional ease of use, resulting in a high quality appearance. BENEFITS: • Acrylic formulation for greater flexibility
• Gives excellent adhesion • High opacity • Lead Free • Excellent UV stability
• Compatible with most materials • Can be applied over previously painted surfaces
PRODUCT CODE
SIZE
P308
400ml
tygrisindustrial.com
28
Self Etching Primer Grey TYGRIS P309 is an acrylic-based paint designed to prepare clean bare metal surfaces, aluminium and fibreglass for a topcoat finish. Specially formulated with inhibitors for effective corrosion prevention, and provides optimum adhesion to bare substrates.
BENEFITS:
• Acrylic formulation for greater flexibility
• Gives excellent adhesion • High opacity • Lead Free • Excellent UV stability
• Compatible with most materials • Can be applied over previously painted surfaces
PRODUCT CODE
SIZE
P309
400ml
Gloss Blue Paint RAL5010 TYGRIS Acrylic-based top-coat paints and primers can be used for a professional finish on most substrates with exceptional ease of use, resulting in a high quality appearance.
BENEFITS: • Acrylic formulation for greater flexibility
• Gives excellent adhesion • High opacity • Lead Free • Excellent UV stability
• Compatible with most materials • Can be applied over previously painted surfaces
PRODUCT CODE
SIZE
P310
400ml
Gloss Green Paint RAL6001 TYGRIS Acrylic-based top-coat paints and primers can be used for a professional finish on most substrates with exceptional ease of use, resulting in a high quality appearance.
BENEFITS: • Acrylic formulation for greater flexibility
• Gives excellent adhesion • High opacity • Lead Free • Excellent UV stability
• Compatible with most materials • Can be applied over previously painted surfaces
PRODUCT CODE
SIZE
P311
400ml
+44 (0) 1294 311 066
team101@tygrisindustrial.com
29
Gloss Red Paint RAL3000 TYGRIS Acrylic-based top-coat paints and primers can be used for a professional finish on most substrates with exceptional ease of use, resulting in a high quality appearance.
BENEFITS:
• Acrylic formulation for greater flexibility
• Gives excellent adhesion • High opacity • Lead Free • Excellent UV stability
• Compatible with most materials • Can be applied over previously painted surfaces
PRODUCT CODE
SIZE
P312
400ml
Gloss Yellow Paint RAL1007 TYGRIS Acrylic-based top-coat paints and primers can be used for a professional finish on most substrates with exceptional ease of use, resulting in a high quality appearance.
BENEFITS:
• Acrylic formulation for greater flexibility
• Gives excellent adhesion • High opacity • Lead Free • Excellent UV stability
• Compatible with most materials • Can be applied over previously painted surfaces
PRODUCT CODE
SIZE
P313
400ml
Gloss Orange Paint RAL2004 TYGRIS Acrylic-based top-coat paints and primers can be used for a professional finish on most substrates with exceptional ease of use, resulting in a high quality appearance.
BENEFITS: • Acrylic formulation for greater flexibility • Gives excellent adhesion • Compatible with most materials • Can be applied over previously painted surfaces
• High opacity • Lead Free • Excellent UV stability
PRODUCT CODE
SIZE
P314
400ml
tygrisindustrial.com
30
Gloss Dark Green Paint RAL6005
TYGRIS Acrylic-based top-coat paints and primers can be used for a professional finish on most substrates with exceptional ease of use, resulting in a high quality appearance.
BENEFITS: • Acrylic formulation for greater flexibility • Gives excellent adhesion • Compatible with most materials • Can be applied over previously painted surfaces
• High opacity • Lead Free • Excellent UV stability
PRODUCT CODE
SIZE
P315
400ml
Black High Temperature Paint
TYGRIS P330 has a safe working temperature of 650°C and when applied as directed, requires no primer. This high-quality paint is suitable for use on engine blocks, exhaust manifolds, brake drums, wood burning stoves, boiler flue pipes and in many other instances. Based on a silicone modified alkyd, when cured, the resins burn off leaving a heat resistant silicone matrix.
BENEFITS:
• Very high temperature resistance • No primer required • Touch dry within 30 minutes
PRODUCT CODE
SIZE
P330
400ml
+44 (0) 1294 311 066
team101@tygrisindustrial.com
31
Heavy Duty Adhesive TYGRIS R210 is an easy to use adhesive for bonding most surfaces, including textile, foam, rubber, plastic, foil, cardboard and paper. Good for fixing down carpets, underlay and floor tiles. In a non-chlorinated form for maximum safety.
BENEFITS: • Fast drying
PRODUCT CODE • Bonds most surfaces • High strength bond
SIZE
R210
500ml
Bright Zinc Galve Spray
BENEFITS: TYGRIS R224 is a bright zinc and aluminium powder based spray used for the cosmetic finishing and protection of previously galvanised surfaces where the component has been cut or welded, thereby exposing metal to the air. Zinc is a sacrificial metal and will prevent oxidisation and corrosion. Resins in the coating cause it to bond firmly to the substrate.
• Zinc content assists in corrosion prevention • Resistant to salt spray and weathering • Excellent heat resistance • Aluminium powder gives a brighter finish to help blend with existing coatings
• Can be used on previously coated surfaces • High purity powders • Excellent adhesion • Quick drying • 150°C Continuous – 400°C Intermittent
PRODUCT CODE
SIZE
R224
400ml
tygrisindustrial.com
32
Heavy Duty Zinc Galve Spray TYGRIS R239 is a high quality zinc spray providing active metal protection against corrosion and an excellent primer coat. The sacrificial properties of zinc contribute to an effective defence against oxidisation should the coating become damaged. Zinc Galvanising Spray can be used both on bare metal and previously galvanised surfaces, and is suitable for spraying onto acrylic or cellulose paints (not alkyd). It may be over-coated with acrylic, alkyd, p/u alkyd and epoxy.
BENEFITS:
• High zinc content for maximum corrosion prevention, including salt spray • Zinc powder in the product is of high purity
• Can be used on previously coated surfaces • Can be over-coated
PRODUCT CODE
SIZE
R239
400ml
TYGRIS Battery Terminal Protector is an easily applied fine film spray which protects battery terminals by sealing them from air and moisture, prolonging battery life and increasing its efficiency. Corrosive deposits are prevented from building up and the coating contains a pH indicator to detect the incidence of leaks. Battery Terminal Protector BENEFITS:
• Easily applied spray • Protects battery terminals from deterioration • Prolongs battery life • Increases starting efficiency
• pH indicator dye detects battery acid leakage and turns from orange to red • Dries to a thick non-slumping grease • Water repellent
PRODUCT CODE
SIZE
R204
400ml
+44 (0) 1294 311 066
team101@tygrisindustrial.com
33
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52 Page 53 Page 54 Page 55 Page 56 Page 57 Page 58 Page 59 Page 60 Page 61 Page 62 Page 63 Page 64 Page 65 Page 66 Page 67 Page 68 Page 69 Page 70 Page 71 Page 72Made with FlippingBook - professional solution for displaying marketing and sales documents online