8. Insert the Fiber Optic Tails through the Sconce hole. Loosen the screw on the collar then insert the Tails into the collar of the Fiber Optic Light Source box. Hand tighten screw on the top of the collar.
9. Align the sconce at the appropriate height on preferred wall. 10. Drill pilot holes in the back of the sconce for appropriate mounting on your wall. Best to install in a stud. 11. Once mounted on the wall with appropriate hardware, run the power cord through the sconce hole and replace the acrylic mirror. 12. Carefully remove the protective film from the acrylic mirror.
Safety Precautions - The safety of your clients is dependent on the appropriate choice of activity to match yet challenge their physical abilities. Use appropriate spotting / safety techniques. In addition, the layout of your activity area, proper installation and maintenance of your equipment is critical. TFH equipment is not intended for general recreational use. Under no condition should this equipment be used without proper supervision. This sheet is for example only. It is not meant to, in any way, replace local, State, or Federal standards. Be aware - it is your responsibility to find all pertinent safety information that pertains to your facility.
All TFH Products are to be used under adult supervision at all times.
TFH102024
Made with FlippingBook - professional solution for displaying marketing and sales documents online