WWW.CONTROLTECHNIQUES.COM
WWW.CONTROLTECHNIQUES.COM
SPECIFICATION
Concentrations not exceeding levels set in: EN 50178:1998 Table A2 IEC 60721-3-3 Class 3C2
Corrosive environments
Immunity Compliance
IEC61800-3, EN60800-6-2, IEC 61000-4-2, IEC 61000-4-3, IEC61000-4-4, IEC61000-4-5, IEC61000-4-6,
F600
IEC61000-4-11, IEC61000-6-1, IEC 61000-6-2.
Step-By-Step Guide, safety information, grounding bracket, grounding clamp, DC terminal cover grommets, terminal nuts, supply and motor connector, surface mounting brackets, control terminals, relay connectors, 24Vpower supply connector and finger guard grommets
Items supplied with the drive
Capable of meeting the requirements of Equipment Category C3 without external filters or line reactors. Capable of meeting the requirements of Equipment Category C2 when installed with the recommended filters and line reactors. IEC61800-3, EN61000-6-4, EN61000-3-2, EN61000-3-12, EN61000-3-3, EN12015
Emission compliance
Storage temperature
-40°C to 55°C, -40°F to 131°F
Operating temperature without de-rate
-20°C to 40°C, -4°F to 104°F
Cooling
Forced cooled
Operating temperature with de-rate
40°C to 55°C, 104°F to 131°F
Safe Torque off
Single STO. SIL 3
Maximum supply imbalance: 2 % negative phase sequence (equivalent to 3 % voltage imbalance between phases). Input frequency 45 to 66Hz
Supply requirements
RS485 with Modbus RTU EtherNet/IP, EtherCAT, PROFIBUS, PROFINET, DeviceNET, POWERLINK and CANopen via option modules
Communications
Switching frequency range
2,3,4,6,8,12,16kHz (Factory default = 3kHz)
Approvals
CE (European Union), cUL Listed (USA and Canada), RCM (Australia/ New Zealand), EAC (Russian Customs Union), UKCA
2 x analogue input, 2 x analogue outputs, 3 x Digital I/O programmable, 3 x Digital input, 2 x NO relay 250Vac Max., 5 x 0V common, 1 x 24V user output, 1 x 24V external input, 1 x STO input. Additional I/O available with SI-I/O option module.
Control I/O
Product safety standard
EN61800-5-1
Functional safety
Single STO Function
Frequency 0.01%,Analogue input 1 and 2: 11 bits plus sign, Current accuracy typical 2%.
Accuracy
Altitude
1000m – No de-rate. 1000m to 3000m - 1% de-rate/100m
On-Board user program capability
N/A
Humidity
95% Non-condensing
Keypad (LCD)
KI- HOA keypad RTC (real time clock), optional HOA Remote Keypad
Pollution
Degree 2. Dry, non-conducting pollution only
‘Connect’ commissioning and cloning tool including CT Oscilloscope, Machine Control Studio for second processor module programming.
IP Rating
IP20 – Pollution degree 2
PC Tools
Reference standard IEC60068-2-29 bump test, IEC60068-2-64 random vibration test, IEC60068-2-6, EN61800-5-1 sinusoidal vibration test.
Vibration
Warranty
5 years
Mounting methods
Surface mount or through-panel mount via mounting brackets
HMI, Remote Keypad RTC, SI-I/O, Remote I/O, SI-Encoder (speed feedback), SI-Universal Encoder, MCi200 (second processor), MCi210 (second processor), SI-Ethernet, SI-EtherCAT, SI-DeviceNET, SI-PROFIBUS, SI-PROFINET, SI-POWERLINK, SI- CANopen, KI-485 comms adapter, SD card adapter, SMARTCARD
Supported options
Output frequency/speed range
599Hz
Braking
In-built braking transistor, external resistor required.
Through-hole IP65 (frame 3 to 8) or IP55 (frame 9 to 11) mounting kits, UL type conduit kits, retrofit mounting brackets, external EMC filters and grounding bracket (supplied with the drive)
Accessories
Operating modes
Open Loop Induction Motor V/F, RFC-A (sensorless induction motor) RFC-S (Sensorless, and feedback via option module)
Overload capability
110% for 165s from cold or for 9s from 100% load
Overvoltage category
Evaluated for OVC III.
Documentation & Downloads Product documentation and PC tools available for download from: www.controltechniques.com/support
134
135
Made with FlippingBook Publishing Software