WWW.CONTROLTECHNIQUES.COM
WWW.CONTROLTECHNIQUES.COM
SPECIFICATION
Cooling
Forced cooled
Safe Torque off
None
Communications
RS-485
Digitax SF
1 x Analogue Input, 1 x Analog Ground 8 x Digital Input Programmable, 6 x Digital Output, 2 x independent digital output, 1 x Control 24V Power Input, 1 x Control Ground, 1 x I/O COM +, 1 X I/O COM-, 7 x simulated encoder output, 3 x RS485 terminals, 8 x Position Pulse Inputs
Control I/O
Items supplied with the drive
Safety information, power input connector, encoder connector
Storage temperature
-20°C to 65°C, -4°F to 149°F
Accuracy
Command pulse -paired ratio: 1/1000 < A/B < 1000,Analogue input: Single Ended ±10V
Operating temperature without de-rate
0°C to 50°C, 32°F to 122°F
On-Board user program capability
N/A
Operating temperature with de-rate
N/A
Keypad
Fixed LED keypad
Maximum supply imbalance: 2 % negative phase sequence (equivalent to 3 % voltage imbalance between phases). Input frequency 45 to 66Hz
PC Tools
‘Digitax SF Connect’ commissioning,waveform monitor and point table setup.
Supply requirements
Warranty
Switching frequency range
N/A
Supported options
N/A
Approvals
CE (European Union), UL(508C if installed in appropriate environment), KC (Korea)
Accessories
Input / Output (I/O) terminal block and cable assembly; Input / Output Interface Connector; Surge absorber / protector; EMC filter
Product safety standard
EN61800-5-1
Encoder
17-bit single or multi-turn (incremental)
Functional safety (Dual STO function)
N/A
Encoder Multi-turn count
65536
Altitude
≤1000m
Humidity
20 – 85% RH or less (Non-condensing)
Pollution
Degree 2. Dry, non-conducting pollution only
DIMENSIONS
IP Rating
IPXX – Pollution degree 2
≤5.8m/s (0.6G) 10 to 60Hz (no continuous operation allowed at resonant frequency
Vibration
W
Mounting Hole Diameter
Overall Dimensions
Mounting Dimensions
Weight
Mounting methods
Surface mount, mounting holes only
Frame Size
mm
in
mm
in
Output frequency/speed range
0 - 500Hz (50W - 750W), 0 – 250Hz (1kW – 2kW)
mm in
kg lb
HWD HWD HWHW
Braking
Mechanical brake control, no internal braking resistor but an external emergency stop braking unit can be fitted
1
160 40 130 6.3 1.57 5.12 150 30 5.91 1.18 5.5 0.22 0.7 1.54
Operating modes
Position, Velocity, Torque
H
2
160 48 130 6.3 1.89 5.12 150 30 5.91 1.18 5.5 0.22 0.8 1.76
Overload capability
350% (50W to 100W), 300% (200W to 2kW)
3
160 68 130 6.3 2.68 5.12 150 44 5.91 1.73 5.5 0.22 1 2.2
Overvoltage category
II
61.7 / 69 *
2.72 / 2.43
4
160 84 130 6.3 3.31 5.12 150
5.91
5.5 0.22 1.6 3.53
Never use the product in an environment containing explosive or flammable gases, chloride, acidic or alkaline corrosive environment such as sulfur dioxide, chlorine, ammonia and so on
Corrosive environments
* Mounting hole separation: 61.7mm at the top, 69mm at the bottom
D
Immunity Compliance
EN 61000-6-2:2005
Emission compliance
EN55011:2009+A1:2010
180
181
Made with FlippingBook Publishing Software