Permanent Anchors
Height Safety Competencies as per AS/NZS1891.4-2.2.11
Users of fall arrest equipment and all people undertaking tasks associated with harnessed based work at heights shall be trained and assessed in accordance with requirements set out below. Height Safety Theory All people falling under the below classifications shall undergo training in height safety theory to a standard equal to that of a nationally accredited general height safety course. Height Safety Operator Operators who are required to perform harness based work at heights shall be trained and assessed in a nationally accredited general height safety course to a level of competence where they can work under a supervisor. The training and assessment shall take into account the type of work, structures, equipment to be used as well as first response methods. Height Safety Supervisor Supervisors shall be assessed as competent if they can demonstrate the above competence, work unsupervised, supervise the job and height safety operators under their control as well as participate in first response rescue. Height Safety Equipment Inspector Designated equipment inspectors shall be trained and assessed in height safety theory and the identification and assessment of all defects that may occur in the equipment they may be required to inspect including manufacturers recommendations where they exist. Height Safety Manager This category applies to people who have tasks associated with harness based work at heights including – personal management, infrastructure design, equipment assessment and selection as well as participation in safe work practice development for harness based work at heights.
Rated at 22kN B-Safe anchor points are designed as permanent purlin mounted anchors. Affording quick and easy installation, B-Safe Anchors are suitable for commercial, industrial and residential applications. It is important to ensure the structure, to which any anchor is installed, has sufficient strength (refer AS/NZS1891.4) to sustain the applied load.
Low Profile Anchor Bolts
BSC5006MRLP-L Suitable for large flat pan roof profiles.
BSC5006OLP-L Suitable for corrugate profiles.
BSL5006A Angle bracket for timber rafter eye- bolt installation.
BSL5008-L Concrete Anchor 16mm with 150mm thread length (not supplied with chemical).
BSC5006LSLP-L Suitable for long span profiles.
BSL5000 Temporary roof anchor bracket.
Temporary Anchors
BSM0035B - Sliding Horizontal Beam Anchor 76mm - 260mm
BP03101.5 1.5m Attachment Strap. Available in lengths from 500mm to 2m.
B-Safe BK061015 Backpack Roofers Kit
B-Safe Backpack Roofers Kit is idealy suited for work on most roofs when used in conjunction with appropriate anchorage.
Features • Rugged construction backpack • Adjustable padded shoulder straps • Communications pouch Code Description
Available in multiple lengths.
Suitable for sliding capabilities for overhead applications.
Kit Includes
Anchor Systems
• 2m Energy Absorbing Lanyard • 15m Rope with double action hook
and manual rope grab • Screwgate Karabiner • 2m Attachment Strap • Harness
BK061015 B-Safe Roofers Backpack Kit
An easily installed 20m webbing temporary lifeline provides the operator with the benefit of horizontal mobility. The UV stabilised heavy duty webbing is tensioned by a ratchet, with any spare webbing stored in the attached carry bag. Lightweight, easy to handle and its versatility make the B-Safe Temporary Horizontal lifeline ideal for general construction, maintenance and contractors where the worksite is constantly evolving. Web Temp Life Line BK040020 Suitable for 1 person.
A temporary horizontal rope lifeline provides the operator with the benefit of horizontal mobility. Easily tensioned this rugged yet lightweight system is easy to install and suitable for general construction, maintenance and contractors where the work conditions may vary from day to day. * Conditions apply
B-Safe Automatic Descender
Rope Temp Life Line BK030030 30m Length
Code Description BFMRG1115 Automatic descender 15m rope length BFMRG1130 Automatic descender 30m rope length BFMRG1160 Automatic descender 60m rope length
BFMRGH1115 Automatic descender with re-wind handle 15m rope length BFMRGH1130 Automatic descender with re-wind handle 30m rope length BFMRGH1160 Automatic descender with re-wind handle 60m rope length BCS0045 Rescue Pole – 2.4 metres extending to 3.8 metres
Be Safe.. Think
Be Safe.. Think
Note: Rope lengths on both automatic and re-wind descenders can be manufactured to suit customers requirements.
126
Frontier volume 1. personal protective equipment
Frontier volume 1. personal protective equipment
127
Made with FlippingBook - Online catalogs