6
ADC TEST STANDARDS
6.5.2 ADC Logo
A mark which is separate and distinct from the listing mark and label containing the following information and indicating compliance with this standard.
6.6 Product Certification
Upon request, the manufacturer shall certify that its product(s) conform to the requirements of this standard.
6.6.1 Seal of Certification
A mark separate and distinct from the ADC label. This seal signifies third - party verification to a specific performance requirement of this standard by an ADC “ Recognized Testing Laboratory ”.
30
6.7 Product Packaging
Unless otherwise agreed or specified between the purchaser and the manufacturer, flexible duct shall be packed in the manufacturer ’ s standard commercial containers.
Unless other specified, each container shall be marked with the following information: • Manufacturer or Brand Name • Product Designation Product Name (Optional) • Size (internal diameter) • Nominal Length of Duct Section • Number of Sections per Container • Storage and/or Stocking Instructions (if any) • Production date or date code of the manufacturer.
Each container shall contain the manufacture ’ s specific installation instruction. (Optionally, these instructions may be printed on the container.)
Made with FlippingBook. PDF to flipbook with ease