Centering Cable Brace(s)
20
3
C
2
20. Locate the center of each span and slide all cable braces to their center positions. Ensure that cable braces are straight/vertical, and then tighten both top and bottom set screws using a 3/32" Allen wrench.
Fastening Top Rails to Brackets
Final Installation Steps
21
23
3
1
2
21. Install #8 x 1/2" screws into pre-drilled holes in top rails to fasten top rails to brackets at each Pass-Through Post and X-Series Anchor Post.
23. Install post caps and bolt caps to complete installation. For bolt caps, align hex shadow line on inner cap with bolt head before installing outer cap.
22
Installing Top Inserts 22. Install top inserts into the open channel above each bracket in all X-Series Anchor Posts.
11
Have Questions? 1–800–BUY–TREX
NOTE: Construction methods are always improving. Please ensure you have the most up-to-date installation instructions by visiting: trex.com
XSHZC-0725
Made with FlippingBook. PDF to flipbook with ease