TREX SIGNATURE® X-SERIES™ HORIZONTAL CABLE RAIL Installation Instructions
Installing Horizonal Cable Rail on an Angle
3
NOTES: » COMPOUND SWIVEL BRACKETS (SOLD SEPARATELY) AND CABLES CAN ACCOMMODATE UP TO A 22.5˚ ANGLE FOR HORIZONTAL APPLICATIONS. » FOR LARGER ANGLES, POSTS MUST BE ANGLED ACCORDINGLY. EXAMPLE BELOW IS FOR A 45˚ ANGLE.
X
Cut Length = X + 5/8" (15.8 mm)
3. Adjust each compound swivel bracket to align with direction of top rail and hand-tighten screws using a 5/32" Allen wrench to temporarily stabilize the swivel bracket. Measure between brackets at location shown, add 5/8" (15.8 mm) and cut top rail to this length. 4. Complete the remainder of the installation following the steps previously outlined. After installation is complete, tighten all screws in each compound swivel bracket using a 5/32" Allen wrench.
1. Follow all instructions as previously stated for standard horizontal installation EXCEPT for where noted below.
2
Measuring and Cutting Top Rails 2. Temporarily slide compound swivel bracket(s) into X-Series Anchor Posts.
12
Have Questions? 1–800–BUY–TREX
NOTE: Construction methods are always improving. Please ensure you have the most up-to-date installation instructions by visiting: trex.com
XSHZC-0725
Made with FlippingBook. PDF to flipbook with ease