TREX SIGNATURE® X-SERIES™ HORIZONTAL CABLE RAIL Installation Instructions
12' Horizontal Cable Rail Configuration
» (2) X-Series Anchor Posts (sold separately) » (2) 6’ Top Rails » (1) Fixed Horizontal Bracket Pack (2) Top Rail Straight Brackets (1) Screw Pack (2) Top Rail Locking Assemblies (2) Top Inserts (1) 9/64" Drill Bit » (1) Pass-Through Post » (1) Pass-Through Post Bracket Pack (1) Pass-Through Post Bracket (1) Barrel Bolt Pack (1) Screw Pack
» (2) Cable Infill Adapters » (2) Cable Braces (w/ set screws included) » (1) Turnbuckle Wrench » (1) Post Mounting Hardware Pack (4) 1/2” x 6” SS Hex Bolts
(4) SS Washers (4) SS Tee Nuts
» (1) Bolt Cap Pack (4) Inner Caps (4) Outer Caps » 12' Cable Assemblies
(Qty 10 for 36” height) (Qty 12 for 42” height)
6' Horizontal Cable Rail Configuration
» (2) X-Series Anchor Posts (sold separately) » (1) 6' Top Rail » (1) Fixed Horizontal Bracket Pack (2) Top Rail Straight Brackets (1) Screw Pack (2) Top Rail Locking Assemblies (2) Top Inserts (1) 9/64" Drill Bit
» (2) Cable Infill Adapters » (1) Cable Brace* (w/ set screws included) » (1) Turnbuckle Wrench » 6' Cable Assemblies
(Qty 10 for 36” height) (Qty 12 for 42” height) * If span between X-Series Posts is 3' or less, a cable brace is not required.
2
Have Questions? 1–800–BUY–TREX
NOTE: Construction methods are always improving. Please ensure you have the most up-to-date installation instructions by visiting: trex.com
XSHZC-0725
Made with FlippingBook. PDF to flipbook with ease