Inserting Cables into Cable Infill Adapters
Top
3b
3a
Approx. 3.25"
3a. Insert short cables into cable infill adapter as shown.
3b. S lide cable infill adapters into X-Series Anchor Posts as shown.
Approx. 2.5"
IMPORTANT: Cable infill adapter should be inserted so that the hole closest to the end is at the bottom of the post. See dimensioned figure above to identify correct orientation of cable infill adapter.
Bottom
Top
4b
4a
Approx. 3.25"
4a. Insert long cables into opposite cable infill adapter as shown.
4b. S lide cable infill adapters into X-Series Anchor Posts as shown.
Approx. 2.5"
IMPORTANT: Cable infill adapter should be inserted so that the hole closest to the end is at the bottom of the post. See dimensioned figure above to identify correct orientation of cable infill adapter.
Bottom
5
Have Questions? 1–800–BUY–TREX
NOTE: Construction methods are always improving. Please ensure you have the most up-to-date installation instructions by visiting: trex.com
XSHZC-0725
Made with FlippingBook. PDF to flipbook with ease