TREX SIGNATURE® X-SERIES™ HORIZONTAL CABLE RAIL Installation Instructions
Threading Long Cables Through Cable Brace(s) and Pass-Through Post(s)
5
2
Cable Brace
Cable Brace
Pass-Through Post
1
3
5. Remove cover on end of cable. Thread the top cable through the top hole in the cable brace. Continue to thread this same cable through the top hole in the Pass-Through Post (when required). If you have multiple spans, continue in this fashion. Next, thread the bottom cable in the same manner. After installing the top and bottom cables, slide the cable brace next to the Pass-Through Post. Tip: Tape cable brace to Pass-Through Post or push close to anchor post for easier installation of remaining cables.
NOTE: If span between X-Series Posts are 3' or less, a cable brace is not required.
6
2
1
2
6. Remove remaining cable covers and thread remaining cables through cable brace(s) and Pass-Through Post(s).
6
Have Questions? 1–800–BUY–TREX
NOTE: Construction methods are always improving. Please ensure you have the most up-to-date installation instructions by visiting: trex.com
XSHZC-0725
Made with FlippingBook. PDF to flipbook with ease