COLLAPSIBLE CORES S-Core Collapsible Cores
NEW TECHNOLOGIES FOR A NEW WAY TO DESIGN In the example below the core is being actuated from the side without the use of cylinders. We are demonstrating how the use of horn/angel pins are used to delayed the opening of the large slide carrier. This is accomplished by slotting the horn/angle pin holes in the back end of the large carrier. The horn/angle pins do not engage in the large slide carrier to move the carrier back until after the small slide is all the way in the back position. This provides a “two stage sequence” action from the side. Sequence: 1. When the mold opens the inside slide retracts back the DME S-Core causing the folding segments to collapse to the open position. 2. Slotted holes in large carrier are there to create a delay in movement until the small slide is in the back position.
3 DIFFERENT S-CORES IN 1 MOLD DME S-Cores can be designed to be used in complex mold geometries.
SEE IT IN ACTION: dme.net/s-core
MULTIPLE S-CORES PIGGY-BACK SEQUENCING
SECTION A-A Mold Closed
SECTION B-B Top Clamp Plate Moves 17.5mm Top DME S-Core Retracts
SECTION C-C Inner DME S-Core Retracts
SECTION E-E Mold Fully Opens Both Slides Retract 10mm B-Side + Ejector Plates Move Forward Allowing The Core Side DME S-Core To Retract
121
U.S. 800-626-6653 ■ Canada 800-387-6600 ■ . Mexico 52-442-713-5666 ■ . dme.net ■ store.dme.net
Made with FlippingBook - professional solution for displaying marketing and sales documents online