SLIDE ACTION COMPONENTS Mini-Might ® Slide Retainers
Typical Application
ANGLE PIN INSERT* ANGLE PIN* (HORN PIN)
X
HEEL BLOCK SLIDE
Y = X +.010 TO +.020 STOP BLOCK WEAR PLATE* RETAINING KEY*
MINI-MIGHT ASSEMBLY*
Z
*AVAILABLE FROM DME
MOLD CLOSED
X = SLIDE TRAVEL CAUSED BY ANGLE PIN Z = V-GROOVE LOCATION IN SLIDE FROM CENTERLINE OF SLIDE RETAINER X = Z Y = STOP BLOCK LOCATION
MOLD OPEN
NOTES: 1. Lubricate all metal-to-metal contact areas before first use and every 100,000 cycles (or more frequently as required). Use a good grade of moldmakers’ non-melting type grease rated for the operating temperature to be encountered. 2. Replace compression spring every 1,000,000 cycles or as required. 3. Do not operate at temperatures exceeding 250°F.
14
U.S. 800-626-6653 ■ Canada 800-387-6600 ■ . Mexico 52.442.713.5666 ■ . dme.net ■ store.dme.net
Made with FlippingBook - professional solution for displaying marketing and sales documents online