FasTie ® Quick Ejector Tie-In System - 1-3/8 & 2-inch Couplers and Pull Studs FasTie 1-3/8-Inch Components
Couplers
Pull Studs
Center Adapters
15.9 .63
7 / 8 –9 Internal Thread (Ref)
1” Hex
30.3 1.19
31.8 1.25
38.1 1.50
12.7 .50
72.8 2.87
25.4 1.00
31.7
Wrench Flats 1.25
35.1 ø1.38
14
ITEM NUMBER THREAD SIZE FTM1.4-50 ½-13 FTM1.4-63 5 ⁄ 8 -11 FTM1.4-75 ¾-10 FTM1.4-M16 M16 × 2 FTM1.4-M20 M20 × 2.5
ITEM NUMBER THREAD SIZE FTF1.4-50 ½-13 FTF1.4-63 5 ⁄ 8 -11 FTF1.4-75 ¾-10 FTF1.4-88X 7/8-9(F) FTF1.4-M16 M16 × 2 FTF1.4-M20 M20 × 2.5
ITEM NUMBER THREAD SIZE FTCA1.4-75 ¾-10 FTCA1.4-M16 M16 × 2 FTCA1.4-M20 M20 × 2.5
Maximun installed center line misalignment of coupler and pull stud is +/-5mm (0.197")
Finished Bar Fixed Length Knockout (Typical Applications) threaded both ends, cut to length
ITEM NUMBER (Special order x.xxx = length in inches)
END 1 THREAD SIZE
END 2 THREAD SIZE
Pull Stud (shown for position only, not included)
End 1 Threads
End 2 Threads
FTFL-50-50-X.XXX FTFL-50-63-X.XXX
1/2-13 1/2-13 5/8-11
1/2-13 5/8-11
25.4 1.00
7/8" Wrench Flats
FTFL-63-63-X.XXX 5/8-11 FTFL-M16-M16-X.XXX M16 x 2 M16 x 2
Threaded Stud (shown for position only, not included)
Per Model Number
FasTie 2-Inch Components Couplers
Center Adapters
Pull Studs
15.9 .63 Ref.
50.1 2.0
38.1 1.5
98.43 3.875
51 2.00
38.1 1.50
12.7 .50
51 2.00
Threads per Model Number
1– 1 /
8 –12 Thread
Threads per Model Number
Elbow Air Fitting for 1 / 8 ”OD Tubing
1– 1 /
Threads per Model Number
8 –12 Internal
1.25” Wrench flats
1–½” HEX
Thread (Ref)
ITEM NUMBER THREAD SIZE FTF2-63 5 ⁄ 8 -11 FTF2-75 ¾-10 FTF2-113X 1-1/8-12 (F) FTF2-M16 M16 × 2 FTF2-M20 M20 × 2.5
ITEM NUMBER THREAD SIZE FTM2-63 5 ⁄ 8 -11 FTM2-75 ¾-10 FTM2M16 M16 × 2 FTM2M20 M20 × 2.5
ITEM NUMBER THREAD SIZE FTCA2-75 ¾-10 FTCA2M16 M16 × 2 FTCA2M20 M20 × 2.5
Maximum installed center line misalignment of coupler and pull stud is + /- 6mm/0.236"
ITEM NUMBER (Spl order x.xxx = length in inches)
END 1 THRD SIZE
END 2 THD SIZE
Finished Bar Fixed Length Knockout (Typical Applications) threaded both ends, cut to length
Pull Stud (shown for position only, not included)
FTFL2-63-63-X.XXX FTFL2-63-75-X.XXX FTFL2-75-75-X.XXX
5/8-11 5/8-11 3/4-10
5/8-11 3/4-10 3/4-10
End 1 Threads
End 2 Threads
25.4 1.00
FTFL2-M16-M16-X.XXX FTFL2-M16-M20-X.XXX FTFL2-M16-M20-X.XXX
M16 x 2
M16 x 2
7/8" Wrench Flats
M16 x 20 M20 x 2.5 M20 x 2.5 M20 x 2.5
Threaded Stud (shown for position only, not included)
Per Model Number
Ejector Bars for 1- 3 ⁄8-inch and 2-inch FasTie’s are special orders. Contact DME Industrial Supplies for information.
214
U.S. 800-626-6653 ■ Canada 800-387-6600 ■ Mexico 52-442-713-5666 ■ dme.net ■ store.dme.net.
Made with FlippingBook - professional solution for displaying marketing and sales documents online