CAVITY AND CORE COMPONENTS Dynamic Gas Vents
SGD14-Series Gas Vents
• High venting capacity • Venting surface slowly affected by mold deposits • In cavity air back pressure dramatically reduced • Improvement of aesthetic characteristics of the injected part • Possibility of front disassembly
GAS
During the injection process the spring keeps the sliding insert in “open position” allowing the gases to exit through the hole on the top of the valve. When the flow front reaches vent the sliding insert moves back under plastic pressure to “close position” and closes the gas venting hole.
The SGD14 valves can be shaped within the maximum limit shown below.
Ø14
SGD1415
Ø14
SGD1410
Ø10
Ø10
ITEM NUMBER
D
E
SGD1410 SGD1415
0.8 0.5
0.4
0.25
283
U.S. 800-626-6653 ■ Canada 800-387-6600 ■ Mexico 52-442-713-5666 ■ dme.net ■ store.dme.net
Made with FlippingBook - professional solution for displaying marketing and sales documents online