INCH PINS, SLEEVES, BLADES INCH Close Tolerance M-2 Through-Hardened Ejector Pins
• •
Industry-Leading .0002" Tolerance Band
INFORMATION KEY: D = Pin Body Diameter H = Head Diameter K = Head Thickness L = Length S = Shoulder Length
Centerless ground D diameter
• Precision made of superior quality M-2 high-speed tool steel • Superior wear resistance • Exceptional performance at elevated temperatures • Hot-forged heads provide uniform grain flow, higher tensile strength
Tolerance on Ø D: -.0003/-.0005 Material: M2 / 1.3343 / SKH51 Heat Treat: Hardened 58-62 HRC Surface Treatment: None (Through-Hard)
Straight Ejector Pins – EJP-IMH
ITEM NUMBER PREFIX (WITH DIAMETER)
Ø D PIN BODY DIAMETER
Ø H HEAD DIAMETER
K HEAD THICKNESS
L = 06 LENGTH (INCHES)
L = 10 LENGTH (INCHES)
EJP-IMH-0062-_*_ 1/16 (0.0625) EJP-IMH-0093-_*_ 3/32 (0.0937) EJP-IMH-0125-_*_ 1/8 (0.1250) EJP-IMH-0187-_*_ 3/16 (0.1875) EJP-IMH-0250-_*_ 1/4 (0.2500)
.250 .250 .250 .375 .437
.125 .125 .125 .187 .187
KEY TO CHART
*HOW TO ORDER: Specify Item Number by adding L length in inches (06 or 10) after Item Number Prefix. • Include zeros and dashes, as shown. Examples: EJP-IMH-0062-06; EJP-IMH-0125-10; EJP-IMH-0250-10
Standard
Contact DME for quote
2" Shoulder Ejector Pins – EJP-IMH
ITEM NUMBER (WITH DIAMETER, LENGTH & SHOULDER LENGTH) EJP-IMH-0062-06-200 EJP-IMH-0078-06-200 EJP-IMH-0093-06-200
Ø D PIN BODY DIAMETER
L = 06 LENGTH (INCHES)
S SHOULDER LENGTH
1/16 (0.0625) 5/64 (0.0781) 3/32 (0.0937)
2.00 2.00 2.00
"
*HOW TO ORDER: Specify Item Number including zeros and dashes, as shown. Examples: EJP-IMH-0062-06-200; EJP-IMH-0093-06-200
KEY TO CHART
Standard
All dimensions are specified in inches.
Contact DME for quote
387
U.S. 800-626-6653 ■ Canada 800-387-6600 ■ DME@DME.net ■ www.DME.net ■ store.DME.net
Made with FlippingBook - professional solution for displaying marketing and sales documents online