INCH PINS, SLEEVES, BLADES INCH Core Pins – High Hardness
• Precision made of superior quality hotwork die steel in high hardness 50-55 HRC • Heads are hot-forged for uniform grain flow, higher tensile strength, then annealed to permit easier machining and stamping • +.0008"/+.0003"‑ tolerance on pin diameter ensures a close fit for coring purposes • Pin body and head are finish ground • Centerless ground and liquid polished
Specials available. See “Special Pins and Sleeves.”
INCH Core Pins – CX
Ø H HEAD DIA
K HEAD THICK
LENGTH
ITEM PREFIX
Ø D PIN DIA
3 †
6
10
14
CX7M_*_ 3/32 (.0937) CX8M_*_ 7/64 (.1093) CX9M_*_ 1/8 (.1250) CX10M_*_ 9/64 (.1406) CX11M_*_ 5/32 (.1562) CX12M_*_ 11/64 (.1718) CX13M_*_ 3/16 (.1875) CX14M_*_ 13/64 (.2031) CX15M_*_ 7/32 (.2187) CX17M_*_ 1/4 (.2500) CX19M_*_ 9/32 (.2812) CX21M_*_ 5/16 (.3125) CX23M_*_ 11/32 (.3437) CX25M_*_ 3/8 (.3750) CX27M_*_ 13/32 (.4062) CX29M_*_ 7/16 (.4375) CX31M_*_ 15/32 (.4687) CX33M_*_ 1/2 (.5000) CX35M_*_ 9/16 (.5625) CX37M_*_ 5/8 (.6250)
.250 .250 .250 .250 .281 .343 .375 .375 .406 .437 .437 .500 .562 .625 .687 .687 .750 .750 .812 .875
.125 .125 .125 .125 .156 .187 .187 .187 .187 .187 .250 .250 .250 .250 .250 .250 .250 .250 .250 .250
KEY TO CHART
Standard
CX41M_*_ 3/4 (.7500) .250 † Heads of 3"-length pins are not annealed. If annealed heads on 3"-length pins are required, they must be special ordered. (Alternately, you may purchase 6" pins and cut to required length.) 1.000
Contact DME for quote
*HOW TO ORDER: Combine Item Number Prefix and the length (L dimension) desired. Examples: CX9M3, CX33M10
394
U.S. 800-626-6653 ■ Canada 800-387-6600 ■ DME@DME.net ■ www.DME.net ■ store.DME.net
Made with FlippingBook - professional solution for displaying marketing and sales documents online