UNILIFTER ® UNDERCUT RELEASING SYSTEM UniLifter ® Typical Application
CORE BLADE
US Patent No. 5,137,442 and No. 5,316,467 Canadian Patent No. 2,048,218 European Patent No. EP498102 Mexican Patent No. 175084
• Standard components simplify mold design and construction for release of molded undercuts • Radiused dovetail design lets core blade seat automatically at the required angle • Smooth travel of U-Coupling in T-Gib eliminates heel binding often encountered in other fixed angle designs • Wide size selection covers more applications than similar standardized systems • H-13 core blades for easy conventional machining • Aluminum Bronze blades for high heat transfer application
U-COUPLING
T-GIB
Core Blades Material: Ampco 21 Hardness: 29 RC
Flat Core Blades – INCH
SERIES (MW)
MT (MIN. THK.)
T + .000 – .001
W + .000 – .001
R
HT
ITEM NUMBER
L + .06 – .00
ULBUA50X50L8 ULBUA50X50L14 ULBUA50X100L8 ULBUA50X100L14 ULBUA50X150L14 ULBUA100X50L8
.510 .510 .510 .510 .510
.510 .510
8
14
W
T
.49
1.010 1.010 1.510
8
14 14
D
1.010
.510 .510 .510 .510
8
ULBUA100X50L14 1.010
14
.500
.406
.187
ULBUA150X50L8
1.510
8
ULBUA150X50L14 1.510
14
L
.62
ULBUA75X150L8 ULBUA75X150L14 ULBUA150X75L8
.760 .760
1.510 1.510
8
14
1.510
.760 .760 .510
8
ULBUA150X75L14 1.510
14 14
ULBUA75X50L14
.760
HT
MT
Round Core Blades – INCH
(MIN.
MW
THK.)
(MINIMUM WIDTH)
R
SERIES (MW)
MT (MIN. THK.)
R
HT
ITEM NUMBER
D + .000 – .001
L
ULBUA75DL8 ULBUA75DL14 ULBUA75DL18
.750 .750 .750
8
NOTE: 1. Thickness (T) and width (W) can be ground by the moldmaker for fitting to insert pockets and/or to accommodate a nominal size molded detail.
.500
.406
.187
.62
14 18
2. Diameter (D) of round core blades is supplied +.000/−.001" (or
+.000/−.025mm) for fitting in a bored hole or bushing.
UniLifter is a Trademark of Progressive Components
88
U.S. 800-626-6653 ■ Canada 800-387-6600 ■ . Mexico 52-442-713-5666 ■ . dme.net ■ store.dme.net
Made with FlippingBook - professional solution for displaying marketing and sales documents online