www.lineartools.co.uk / 0208 400 2020
10
Metric&Imperial - Inspection&WorkshopGrades GaugeBlockSets
DigitalShoreA Durometer
ElectronicDigitalCaliper FREE
• Large digit size: 14mm • 3 button control: ON/OFF, HOLD & ZERO • Power: 1 x Lithium CR 2032 - 3v battery • Manufactured to comply with BS ISO 7691-1:2004 • Supplied in fitted case complete with check block
FREE 150mm/6” Electronic Digital Caliper with every Gauge Block Set purchased
Order Code 59-522-666
Description/Size Digital Durometer
Offer Price £132.80
List Price £166.00
ShoreHardnessDurometers ISO7619/ASTMD2240
• Manufactured from specially selected high quality age hardened alloy steel • Each block is heat treated to HRC65/HV820 for high resistance to wear • High quality surface finish • Available in 2 grades: Inspection & Workshop • Each set is supplied with a 5 point UKAS Certificate of accuracy • Steel gauges must be cleaned after use to avoid corrosion • Sets are supplied in high quality fitted wooden box Metric Gauge Blocks: BS EN ISO 3650:1999 Order Code Set Pieces BS Grade List Price
PDF 1227 CLICK FOR
• Shore ‘A’ (6mm min) • Shore ‘D’ (3mm min) • Fast and easy to read • Supplied with a setting reference block • Manufactured to ISO 7619/ASTM D2240 • Supplied in a fitted case
Offer Price
£407.00 £608.00 £517.00 £797.00
47 87 47 87
WKS 2 WKS 2 INSP 1 INSP 1
£452.00 £676.00 £574.00 £886.00 List Price £406.00 £564.00 £512.00 £798.00
53-670-047 53-670-087 53-671-047 53-671-087
PDF 1001 CLICK FOR
Imperial Gauge Blocks: BS 4311:Part 1:2007 Order Code Set Pieces
BS Grade
Offer Price
£365.00 £507.60 £461.00 £718.00
36 81 36 81
WKS 2 WKS 2 INSP 1 INSP 1
53-670-036 53-670-081 53-671-036 53-671-081
Order Code 59-500-000
Description/Size Shore ‘A’ Scale
List Price £234.00
Offer Price £187.20
SurfaceGauges Gauging
• Hardened and ground base • Ground vee groove in base for mounting on cylindrical work • Retractable pins provided in the base for work on flat surfaces • Double ended 4mm scriber with hardened points for marking out • Fine adjustment of spindle may be made at any angle above or below the base • US Fedral Specification: GGG-G-17C/16 Jun 1987
PDF 1397 CLICK FOR
Offer Price
Order Code 5033-007 5033-009 5033-012
Description/Size
Base Size
Price EACH
Pillar 1 Length Pillar 2 Length
£54.60 £59.20 £62.60
175 mm
Small Base with 2 Pillars Large Base with Single Pillar Large Base with 2 Pillars
56 x 40 x 18
100 mm
£78.00 £84.60 £89.40
82 x 63 x 27.5 mm 225 mm 82 x 63 x 27.5 mm 225 mm
N/A
300 mm
Made with FlippingBook Learn more on our blog