ORO2U Dirt Catalogue - Section D - Service and control.

Cable Making Materials

Controls

Workshop DIY Cable Kits Kits for making cables. Includes inner wire, outer casing, nipples, ferules and boots. (Only Venhill kit comes with nylon liner). Throttle kit (Dirt Racing) 14-904.EA Trade pack of 5 14-904.PK/5 Throttle Kit (Venhill) 14-904.VH

Clutch/Front Brake

14-905.DR 14-905.VH

Clutch/Front Brake (Venhill)

14-893

Cable Inner Wire Repair Kits Cable inner wire repair kit. Will repair clutch, throttle, brake or decompression cables. Kit includes: 3 solderless nipples, 4 other mixed nipples and 2 lengths of inner wire: A-Wire: O.D 1.5mm, Length 200cm. B-Wire: O.D 1.2mm, Length 200cm. Cable Inner Wire Repair Kit 14-893.EA Wire Inner with Nipple 1.5mm Inner Wire 1400mm Length 5.5 Ball or 3X4 Nipple - WIRE. Galvanized Wire 1.5mm 7X7 - WIRE LENGTH 55” (1400mm) Length - NIPPLE. 5.5mm ball on one end, 3x4mm carb nipple on other end.

14-904 Throttle Kit

14-9081

- Cut off un-needed end. Wire Inner with Nipple

14-9170.FIR

14-9080.FIR

14-9082

Universal Cable Repair Kits Universal cable repair kits.

Clutch repair cable: 1.95mm x 2m with solderless nipple for open end. Throttle repair cable: 1.20mm x 2m with solderless nipple for open end. Perfect kits for your tool box or bumbag to get you home in an emergency. Universal Clutch Cable Repair Kit 14-9081.KY Universal Throttle Cable Repair Kit 14-9082.KY DIY Cable Repair Kit Ideal kit to put in your kit / bum bag! FIR pocket sized cable repair kit is a must habe for a prepared motorcyclist. Off roading, touting or fizing your buddy’s bike, it is an essential kit for those unexpected moments. Parts include the following: • 1.6m of 1.5mm dia bowden cable with a 3.5mm to 6mm stepped nipple on one end • 1.6m of 1.1mm dia bowden cable with a 3mm nipple on one end • 1 x 10mm dia x 20mm solderless nipple • 1 x 8mm dia x 12mm solderless nipple • 1 x 5mm dia x 8mm solderless nipple • 1 x 8mm dia x 14mm solderless nipple with sleeve and nut • 1 x 7.8mm dia x 9mm horizontal barrel nipple for 1.5mm dia cable • 1 x 7.8mm x 15mm shouldered horizontal nipple for 1.5mm dia cable • 1 x 3.5mm to 6mm brass steed sleeve nipple for 1.1mm cable FIR DIY Cable Repair Kit 14-9840.FIR Workshop DIY Nipple Kits Containing 15 of the most popular cable nipples in current use. Consisting of ball, barrel and trumpet nipples all manufactured in brass. Workshop DIY Nipple Kit 14-902 Workshop DIY Adjuster Kits This kit contains cable end ferrules as well as popular end adjusters. Components are manufactured either from brass or mild steel (zinc plated) and can be individually topped up at any time. Workshop DIY Adjuster Kit 14-903

14-9170.FIR

Cable Wire

14-902

Cable Wire Inner Wire 10m Rolls (19 Wire Make Up)

Outer Wire 10m Rolls (Black Outer Case)

Diameter

Part No.

Description

Part No.

1.20mm (0) 1.50mm (1) 2.00mm (2) 2.30mm (2a) 2.50mm (3)

14-910 14-911 14-912 14-913 14-914 14-916 14-915

Throttle Outer Cable (10m)

14-920.10m

Throttle Outer Cable, 5mm (10m) Throttle Out Cable, 6mm (10m)

14-923 14-924

Clutch Outer Cable (10m)

14-921.10m

Clutch Outer Cable, 3mm (10m)

14-925

3.00mm

Throttle/Decompressor (With Teflon) 14-923.VH

4.00mm (4)

Control Cable Items Brass Nipples. Solder Type 3/8” x 3/8” (9.5mm x 9.5mm) Split Type 3/8” x 3/8” (9.5mm x 9.5mm)

14-907.SI

14-967

14-968

14-968.Pack/20 14-967.Pack/10

Rubber Cable Boots Rubber boot for cable ends, overall length 48mm, inside diameters: 14mm and 8mm. Rubber Boot 14-933 Throttle Cable Protection (4-Stroke) Aluminium thottle cabel protection for 4-stroke throttle cables. Only available in silver. Throttle Cable Protection (4-Stroke) 14-907.SI

14-933

Rubber Cable Boot For bottom end of cable to seal cable onto carb top adjusters. Part No. 14-931

Rubber Cable Boot For top end of cable to seal cable onto twistgrip. Part No. 14-932

*Please visit our website for current prices

D126

www.oro2u.com

Tel: 01597 822 666

Fax: 01597 825 224

Made with FlippingBook - Online magazine maker