Suspension
Fork Bleeders
Pro Bleeder M5x0.8 Fits most Kayaba and Showa upside-down forks with OE bleeder screws (M5 x 0.8). Easy to install, simply replace the OE bleeder screw with the Pro Bleeder. Set includes 2 Pro Bleeder valves with adapters, O-Rings and instructions (installed height of 22mm). Pro Bleeder M5x0.8 KYB, Showa (FI) 29-006.FI Trade Pack Of 10 29-006.FI/PK10 Pro Bleeder KTM With External Preload Kit includes bleeder valves and adapters for use on KTM Fork caps and all WP43 and WP48mm fork caps with external spring preload adjustment. Will reduce harshness caused by air build up and allows bleeding of air pressure without tools. (Also identifiable by the four holes which require the pin spanner 00-214 to remove cap). Pro Bleeder M4x0.7 KTM 29-008.BK Pro Bleeder M4x0.7 KTM (MP) 29-008.BK.MP Pro Bleeder KTM With External Preload For use on all 1999 and later WP43 and WP48 fork caps (P/N’s4860.0020S and 4860.0020S1) without external spring preload adjustment. These fork caps DO NOT require a pin spanner to remove the fork cap. Easy to install, simply replace the OE bleeder screw with the Pro Bleeder, Reduces harshness caused by air build-up, Allows bleeding of air pressure without tools, One of the easiest bolt-on upgrades you can make to your forks, Kit includes bleeder valves and adapters (installed height of 7/8” or 22mm). Pro Bleeder M4x0.7 KTM (FI) 29-009.FI Trade Pack Of 10 29-009.FI/PK10 Pro Bleeder M4x0.7 KTM (MP) 29-009.GD Pro Bleeder KTM With External Preload For use on all 2007 WP43 and WP48 fork caps without external spring preload adjustment. These fork caps DO NOT require a pin spanner to remove the fork cap. Easy to install, simply replace the OE bleeder screw with the Pro Bleeder, Reduces harshness caused by air build-up, Allows bleeding of air pressure without tools, One of the easiest bolt-on upgrades you can make to your forks, Kit includes bleeder valves and adapters (installed height of 7/8” or 22mm). Pro Bleeder M4x0.7 KTM 2007 29-014 Fork Bleeders KTM With External Preload Fork bleeders for KTM with external preload. Thread: M4 x pitch 0.7mm/5.6mm long O.D 7.9mm. W/2pcs o-ring. Ktm late model forks 2007-on all SX/SXF/XC/XCF/XCW models with WP 4860 mxma cc closed cartridge fork caps. (Ktm # 48600516s1) and also wp 4cs forks. Also for use on all 1999 and later WP 43/WP 48 fork caps (P//N’s 4860.0074S and 4860.0075S) with external
29-006
29-008
29-009
29-014
29-015
spring preload adjustment. Fork Bleeder M4x0.7 KTM
29-015.DR
Pro Bleeder Kit Kit is designed for the professional who wants the cleanest possible setup. Required drilling, tapping and end milling of the fork caps. Kit includes 2 Pro Bleeder valves, 5/16 - 32 tap, 9/32 drill bit, washers and instructions (low profile installed height of 3/8” or 9.5mm - 3/8” end mill not included). Pro Bleeder Kit 29-007
29-007
Replacement Bleeder Replacement bleeder for Pro bleeder kit (29-006) Replacement Bleeder 29-010
29-010
KYB Fork Bleed Screw Replacement fork air bleed screw fits most Kayaba forks up to 2002. Replacement KYB Fork Air Bleed Screw 29-011
29-011
*Please visit our website for current prices D157
E-mail: sales@oro2u.com
www.oro2u.com
Made with FlippingBook - Online magazine maker