Magura Hydraulic Clutches
Controls
Magura 163 Hymec Hydraulic Clutch Replacement Parts
Position Description
Magura # Part No
1
n/a
n/a
Clamp with spiral spin
0720546 13-030.SR.M
2
Clamp for threaded mirror mounting M10x1.25mm
0720543 13-064
3 4
n/a
0720572 n/a
Protection cover for lever
0429633 13-034 0720501 13-792
Long lever blade with accessories and coil spring
Long lever blade with accessories and coil spring L = 147 mm
0720598 13-0573.MA
Short lever blade with flat leaf spring L= 115mm 0720545 13-0571.MA Short lever blade with accessories and coil spring L = 123.5 mm 0720600 13-0572.MA Special lever blade f. master cylinders with bigger space L = 152 mm 0722021 13-0574.MA
5
6 7
n/a
0720504 n/a
Decomp. lever black
0720552 13-795
Cover without deco-/choke lever
0720544 13-0558.MA
8
Cover with thread for decomp. Lever (KTM)
0720553 13-063 0720559 13-062
Cover with hole for decomp. lever Reservoir membrane for mineral oil Master piston Ø 9,5mm Mineral oil Master piston Ø 10,5mm Mineral oil
9
0720560 13-0559.MA
0720555 13-032 0720499 13-031 0120653 13-052 0120647 13-051 0120645 13-056 0720549 13-066 0131890 13-068 0131893 13-069 0720551 13-070 0431863 13-071
10
Slave Cylinder KX 48mm Slave Cylinder KTM 24mm Slave Cylinder YZ250 20mm
20
Replacement Hose Kit KX, CR, 125/250 Replacement Hose Kit KTM 125/250 Replacement Hose Kit KTM 250/380 Replacement Hose Kit KTM 4 Stroke
22
Replacement Hose 5m roll
23 31
n/a
n/a
Service-Kit HYMEC
0722152 13-049
Clutch Master Cylinder Piston / Rebuild Kit 9,0mm
0306953 13-0570.MA
Replacement dust cover for piston
0433085 13-721 0430950 13-060 0720308 13-061 0430876 13-065
Banjo Bolt 6mm
Pipe Olive Pipe Nut
IDR Clutch, L = 12mm IDR Clutch, L = 15mm
0430987 13-0548.MA 0430985 13-0549.MA
Replacement HYMEC Clutch Slave Cylinders Magura Hymec – Remove the slave cylinder from the motorcycle and activate the master cylinder until the slave cylinder activation rod is fully retracted and withdrawn. The piston in the slave cylinder is now contacting the bronze cap at the back of the slave cylinder and the rod length should be measured as shown on top of page 29. If the slave cylinder is no longer working it can be removed from the pressure line and forced slowly and carefully into the slave cylinder for the measurement.
Part No. 13-0554.MA Magura # 2100308
Part No. 13-0555.MA Magura # 0120651
Part No. 13-0556.MA Magura # 0120657
*Please visit our website for current prices
www.oro2u.com
Tel: 01597 822 666
Fax: 01597 825 224
D78
Made with FlippingBook - Online magazine maker