ORO2U Dirt Catalogue - Section A - Tools

KTM Special

Tools

Shock Needle Removal Driver

Dual Chamber Fork Cap Wrench

Shock needle removal driver. Its special pin design is for working the WP PDS Shock body, to remove the compression needle from the shock. Fits KTM’s with White Power PDS shocks. Shock Needle Removal Driver 00-8060

Has a 12mm slot for holding the damper rod for removing the rebound bolt. This allows for the removal of the cartridge from the lower fork leg. Made from billet 6061-T6 and anodized

Motion Pro blue. 50mm, 6pt box wrench for removing the fork cap (cartridge) on WP 4860 MXMA dual chamber closed cartridge (WP USD 48mm) on late-model KTM’s. 50mm Fork Cap Wrench 00-872

KTM Power Valve Adjustment Tool Power valve adjustment tool. For use on KTM 2-Stroke models; 200/250 SX, 250 XC/XC-W, 250/300 EXC and 300 XC/ XC-W. Constructed from aluminium, this tool features a special 5mm square drive end for adjusting the power valves. Power Valve Adjusting Tool 00-8061

Compression Bolt Removal Tool KTM

22mm hex and 3/8 square drive. This tool allows removal and replacment of the accessory fork cap KTM Part No. 4860074S. This tool is slotted to allow removal and replacement of caps with the KTM Pro bleeder. KTM Fork Cap Remover 00-214

KTM Crankshaft Mounting Tool

KTM Crankshaft mounting tool. Specifically designed for KTM crankshaft assembly. Fits crankshaft smoothly without damage to crankshaft or bearings. Overall length of tool is 146mm and constructed from carbon steel. Fitting face is O.D. 70mm x I.D. 43.5mm / 3.5mm depth. Long bolt end is Dia. M12 x 1.25mm with drive hole. KTM Crankshaft Mounting Tool 00-8100

Primary Gear Wheel Bracket Tool Primary gear wheel bracket tool for use on KTM 440 EXC 1994-95 & 550 MXC 1996. This tool is designed with special curved teeth for use on the primary gear location on crank. Primary Gear Wheel Bracket Tool 00-8063

KTM Locating Drum Tool

KTM Locating drum tool. Used to hold the location drum when dismantling and assembling the engine. Specifically designed so as to prevent damage to the engine parts. 5mm thick x double hex 35.5 / 39mm. Constructed from high quality steel with a zinc plated finish. OEM Ref: 5032903800. Fits: KTM 125/200 1997-10, 144 SX 07-09 & 150 SX 2009-10. KTM Locating Drum Tool 00-8099

Oil Filter Removal Tool

• Ideal for easy removal of recessed KTM oil filters. • Conical point screw pierces and grabs the sheet metal end- cap on filter. • Contoured handle provides a secure grip. • Reduces potential damage to the engine cases. • Not for use on re-usable oil filters. Oil Filter Removal Tool 00-619

KTM Heim Joint Tool

Removes and replaces KTM Heim joints (OEM Ref: 50304090044) or aftermarket equivalents. Aligns Heim joint for easy installation. Built in stop correctly centers Heim joint in swing arm. Aligns and installs Heim joint seals. Anodized aluminium construction reduces the possibility of damaging your swing arm. Handle includes retention o-ring to hold Heim joint adaptors and Heim joint bearing in place. Ergonomic handle for a comfortable fit. Made from billet 6061- T6 and anodized Motion Pro blue. KTM Heim Joint Tool 00-644

A-Arm Needle Bearing Press Tool A special tool for fitting A-arm needle bearings. Designed for use when installing the A-Arm needle bearings on KTM 450 & 525 ATV models. Tool has a carbon steel construction. Overall length 85mm x Both end faces 10mm. A-Arm Needle Bearing Press 00-8064

*Please See Our Tools Catalogue For Full Range Of Products

E-mail: sales@oro2u.com

www.oro2u.com

A9

Made with FlippingBook - Online magazine maker