SITE WORK RULES
6.1 DRESS CODE Employees are expected to maintain a neat, safe, and professional appearance. Shop Floor: Employees must follow the dress code for their work area. Shirts must have sleeves, pants must be long and durable, and shorts are not permitted. Required footwear and PPE vary by area. Clothing that is loose or overly restrictive is not allowed. Office: Employees should wear clean, neat clothing appropriate for vendor and customer interaction. Jeans are permitted if free of holes or excessive wear. General: Clothing must be clean, free of holes, stains, or offensive graphics.
6.5 CLOCKING IN AND OUT OF E-2 Foundry and machine shop employees must clock in and out in E2 at shift start/end and for all required operations. Failure to record time accurately may result in disciplinary action, up to and including termination. action, up to and including termination. If you forget to clock in or out or notice an error, you must notify your supervisor or HR immediately so it can be corrected. All overtime MUST be approved in advance by a supervisor. Unauthorized overtime may result in discipline but will still be paid if worked. 6.4 TIMEKEEPING All employees must accurately record their time using the Company’s timekeeping system. General Requirements Employees must clock in at the start and end of their shift and clock out for unpaid meal periods if leaving the premises. Time must be recorded at the actual time worked; rounding or falsifying time records is strictly prohibited. Employees may not clock in or out for another employee. Doing so will result in disciplinary
6.2 PERSONAL PROTECTIVE EQUIPMENT (PPE)
All necessary PPE (such as non-prescription safety eye-wear, face protection, head protection, hand protection, arm protection, knee protection, hearing protection, respiratory protection, fall protection, etc.) Shall be furnished by the company. Employees have a duty to wear PPE provided by the company, PPE provided shall be worn in the manner it is intended by the manufacturer. Closed-Toe Safety Shoes : Required for all production employees and supervisors. No work may be performed without them. Ear Protection: Required in the Foundry at all times. Safety Glasses: Required throughout the plant with side shields, except in designated inspection areas. Unless specified at hire, TBA supplies the hand tools required for your position. Specific tools are issued through the tool room and must be signed out and returned at the end of each shift, unless your supervisor approves otherwise. 6.3 TOOLS
6.6 SMOKING
TBA is a smoke-free workplace in compliance with applicable law. Smoking or vaping (e- cigarettes) is prohibited in all buildings and indoor work areas, Company vehicles/equipment, and any area not specifically posted as a designated smoking area. Use only posted areas, remain at least 25 feet from entrances, air intakes, and fuel/chemical storage, and fully extinguish and dispose of materials in provided receptacles. Failure to follow this policy, or poor housekeeping in designated areas, may result in discipline, up to and including termination.
TAMPA BRASS AND ALUMINUM CORP | PAGE 26
Made with FlippingBook - Share PDF online