3.2 Preparing the machine and edge A few settings must be configured before the CONTURO can be operated. The display on the machine automatically guides you through the necessary steps.
Preparing the machine
1
2
Secure the support base first using the accompanying screw.
Insert a minimum of two adhesive cartridges before using for the first time. CHANGING COLOURS Page 63 Changing colours, refilling, etc. Chapter 5
3
4
You can use the temperature preselection switch to adjust the temperature according to the colour of the adhesive cartridge selected. CORRECT TEMPERATURE Setting 1 = 190 °C (374° F) for natural coloured adhesive Setting 2 = 200 °C (392° F) for white adhesive
Now press and hold the ON button until the Festool logo appears on the display.
22
Made with FlippingBook - Online catalogs