CONTURO Edge Bander booklet

Adjusting the edging height




Slide the edge band into the edging infeed. NOTE Note that the edging height can only be adjusted at operating temperature.

Use the rotary knob to adjust the edging height until the edge band touches at the top and bottom. Then turn back the switch 1–2 locking positions so that there is some play in the edge band.



Briefly press the start button.

When the symbol for inserting the edging appears, guide the edging into the active infeed until it is drawn in. When the tick mark appears on the display, the edging has reached starting position and the machine is ready for gluing.


Made with FlippingBook - Online catalogs