3
2
3
Then mount the adapter plate and guide plates as described in the operating manual. The guide plates make it easier to guide the workpiece over the bench. 15 guide plates are delivered with the adapter plate as standard but additional guide plates are available as accessories. TIP The hole spacing on the guide plates is designed for system 32, which makes it easier to manufacture individual worktops. You can also screw on guide plates without threaded bushes using normal wood screws.
Insert the CONTURO in the adapter plate as follows: first tilt the adapter plate upwards and lock in position.
4
5
Then release the lock on the right and left of the panel, slide the CONTURO into position and lock again.
Now set the required angle on the scale and lock both clamping screws. Your stationary unit is now ready.
41
Made with FlippingBook - Online catalogs