Attaching the VAC SYS to the MFT
The multifunction table MFT/3 provides another option for working with the VAC SYS. Since the working height of a VAC SYS mounted on the MFT is too high for most users working with the CONTURO, we recommend the following adaptation:
2-5/16”
2-5/16”
1-1/2”
1-1/2”
7-5/8”
7-5/8”
3-7/16”
3-7/16”
1/2”
1/2”
19-11/16”
For example, use ¾” Plywood (9 13/16” x 1’ 7 11/16”” Drill holes with a diameter of ¼” according to the drawing. The VAC SYS is secured with 4 x M5 60 mm carriage bolts and 4 x M5 wing screws with Washers.
The board is secured to the MFT via the groove on the side Profile le of the MFT. Compatible keys and rotary knobs are Available from Festool as spare parts: 2 x 437377 key, 2 x 482110 rotary knob.
68
Made with FlippingBook - Online catalogs