FLOOR SUPPORT PLATE
*The floor on which the racking system rests must be checked in terms of suitability for withstanding the pressure and the puncturing (drilling) stress applied by the shelving system itself and the pulling strength exerted by the anchor. **The area must not be submitted to any other force.
The support plate is designed to distribute the pressure applied on the floor by the side wall. A technical data sheet supplied by FAMI is useful to check the suitability of the floor intended for racking system installation. The support plate is provided with a hole for plate anchoring to the floor by means of standard anchor bolts. This operation is necessary to ensure shelf safety.
T inst
t fix
h1
h nom
H
Floor edge
recommended anchor strength
11,65 Kn
anchor diameter
Ø16 mm
concrete hole diameter
Ø16 mm
minimum hole depth
h 1 115 mm h nom 95 mm t fix 25 mm T inst 125 Nm
B
minimum installation depth
Ø 19
max adjustable thickness
120
max tightening torque
min floor thickness for anchor plug fixing*
H: 160 mm
Anchor strength application area
min anchor distance from the edge of the floor
B: 175 mm
anchor strength application area**
A: 112,5 mm
min upright distance from the edge of the floor
C: 75 mm
COMBINATION OF SERIES COLOURS
grey RAL 7000
green RAL 6011
blue RAL 5012
5000 1000
Capacity each span
Telescopic extension shelf capacity
kg
800 300 250 200
Plain extension shelf capacity
Strengthening shelf capacity for depth 900 mm
Strengthening shelf capacity for depth 1100 mm
Strengthening shelf capacity for depth 1300 mm
1252
Made with FlippingBook - Online catalogs