Romanit Limewash shown on stucco: Wall color: Bianco Pura Stair color: Custom color match
TIPS for APPLICATION
• Read the Technical Data Sheet before application, available at keim.com • Check your masonry surface to be sure it is absorbent with water. If water penetrates and darkens the surface you may proceed. If water beads up, do not proceed. • Always apply when temperature is between 40 and 90 degrees. Do not paint if frost is predicted within 48 hours or rain is eminent. • Thin with clean water only. Do not add other additives to Limewash. • Limewash will become more opaque as it dries. • Dampen masonry surface before you start to apply Limewash — surface should not be wet, but damp. • For wash off technique, begin washing off after 12 — 24 hours of dry time. After 72 hours, it will be more difficult to remove the paint. • To achieve a mottled appearance on interior walls, apply two coats with a large façade brush in a random or “X” pattern. Use a more diluted coat for the second application. More layers will create a unique “depth” of color and varied texture. • Clean-up is with soap and water. Run-off will not damage plants, but may stain other masonry if not rinsed clean. Protect glass from Limewash during application.
KEIM Mineral Coatings of America, Inc.. 10615 Texland Blvd. #600 Charlotte, NC 28273 866.906.5346 KEIM.com info@keim.com
Made with FlippingBook - Online Brochure Maker