IGNITE TE CH OUTDOOR FURNACE MANUAL COMMERCIAL MODEL: HD90X SAVE THESE INSTRUCTIONS
Congratulations! You have selected the finest quality outdoor wood and coal burning furnace, manufactured with pride in the USA. Please take a few moments to carefully read the owner’s manual. By taking the time to familiarize yourself with your new Ignit e Tech Furnace, you will be able to look forward to years of trouble-free, dependable service. Installation: • First, check local codes. The installation must comply with all local rulings and requirements. • This furnace is an outdoor hot air furnace and must not be altered in any way. • This furnace requires a back-up electric generator, 2000 watts minimum, in case of power failure. • Always have a properly installed and functioning smoke detector installed in your building . • To prevent accidental injury, do not allow anyone who is unfamiliar with the furnace to operate it. • Spend time familiarizing yourself with your Ignite Tech Furnace, especially the different settings and the effects they have on burn patterns. It is impossible to predict how each setting will affect your furnace, due to variations in conditions, fuels, and temperatures. • When making plans to install your outdoor furnace, the first thing you need to think about is the placement of the unit. Although you can install the Ignite Tech Furnace up to 25 feet from the building , a much shorter distance is recommended to provide better airflow. The furnace has been tested for clearance of 31 inches from the building ; this would give maximum airflow and provide the highest efficiency. Transportation Damage Every effort has been made to ensure that your Ignite Tech Furnace will arrive in perfect condition. Any visible damage should be noted on the freight bill at the time of delivery. If upon unpacking your furnace, you find that damage has occurred during transit, notify Ignite Tech Customer Service immediately: 1- 800-875-4788. Disclaimer Notice The listed BTU rating of your new Ignite Tech Furnace was obtained using laboratory calculations. The actual BTU output you experience may vary somewhat depending on the type, condition, and moisture content of the fuel used, damper adjustment, chimney type and other variables. Therefore, the manufacturer disclaims any guarantee as to the BTU output or capacity of your furnace. Ignite Tech Furnace disclaims any responsibility for the following: installation of a furnace that has been altered or modified in any way; installation of the furnace other than as instructed in this manual; installation and or use of any component or part not approved by Ignite Tech Furnace for use on this furnace. Be sure to complete and return your warranty card within 30 days of purchase in order to activate warranty coverage on your furnace. Manufacturer's Notice Please be advised that periodic changes are made to improve the furnaces. Therefore the information in this manual may not be completely applicable to your Ignite Tech Furnace. Please refer to markings on the appliance for additional information. THIS IS A WOOD AND COAL BURNING FURNACE ONLY AND SHOULD NOT BE ALTERED IN ANY WAY. FOR COMMERCIAL USE ONLY .
1
Made with FlippingBook - professional solution for displaying marketing and sales documents online