General Information ALWAYS KEEP YOUR WOOD COVERED YEAR ROUND; DRY WOOD WILL PRODUCE MORE BTU OUTPUT AND LONGER BURN TIMES. The Ignite Tech Furnace is an airtight central solid fuel outdoor furnace engineered to accommodate the heating requirements of the average sized building , even during winter’s coldest months. It is constructed of high grade, heavy gauge steel and is continuously welded to assure the utmost in structural strength. The insulated firebox will accommodate a log up to 34 inches in length. In addition, the heat exchanger is lined with firebrick to ensure many years of energy efficient service. The design of the secondary combustion chamber increases fuel efficiency by creating a “secondary burn” of smoke and wood gases before they are vented up the chimney. By sending the gases back through the secondary combustion chamber, less fuel is wasted, the furnace burns at a higher efficiency, and for longer burn times. The cast iron door is custom fitted to provide an airtight seal, greatly extending the burn time and ensuring maximum efficiency in fuel consumption. The heavy-duty cast iron grates aid in convenient ash removal and reduce maintenance; the insulated wrap-around sides are designed for maximum heat transfer. For total comfort and convenience, a thermostatically controlled 1800 CFM circulation blower system has been installed. The blower draws the cold air from the building , across the heat chamber before going through the hot air duct and returning the warm air in to your building . This fully automatic blower furnishes rapid heat dispersement to your building , minimizing recovery time. Average burn time per load of fuel is 2 to 12 hours depending on wood or coal type and condition, desired temperature within the building , size of the building, and amount of fuel. We have incorporated all of these features as standard equipment, offering you the most efficient, durable and affordable appliance possible. Abnormally cold weather could reduce the burn time. Your Ignite Tech Furnace is designed to be either a supplemental or central heating source for your building . This wood and coal burning furnace may be installed in parallel with a properly operating electric, gas or oil-fired central furnace, listed or certified in accordance with a nationally recognized safety standard, and within clearances specified on Ignite Tech Furnace nameplate. When in a parallel installation the static pressure of the central furnace plenum may not exceed 0.15 water column inches and the maximum setting on central furnace limit switch is 182°F. With the Ignite Tech Furnace in an “Interconnection Arrangement” your furnace should be upstream of the central furnace. The Ignite Tech Furnace warm air supply should never be connected to return air for the central furnace. A qualified installer should perform the installation. This is a wood and coal burning furnace – it cannot be turned “off and on” to control the furnace temperature like gas or electric furnaces. Once the fire is established, it has to burn until all of the fuel is consumed .
3
Made with FlippingBook - professional solution for displaying marketing and sales documents online