IGNITECH INDOOR FURNACE MANUAL MODEL: HD80
SAVE THESE INSTRUCTIONS
Congratulations! You have selected the finest quality wood and coal burning indoor furnace, manufactured with pride in the USA. Please take a few moments to carefully read the owner’s manual. By taking the time to familiarize yourself with your new IGNITECH Furnace, you will be able to look forward to years of trouble-free, dependable service.
Installation: First: Check local codes. The installation must comply with all local rules and requirements.
Furnace installation is to be performed by a qualified installer. This furnace must not be installed in trailers, modular or mobile buildings . Always have a properly installed and functioning smoke detector in your building . To prevent accidental injury, do not allow anyone who is unfamiliar with the furnace to operate it. Spend time familiarizing yourself with your IGNITECH Furnace, especially the different settings and the effects they have on burn patterns. It is impossible to predict how each setting will affect your furnace due to variations in conditions, fuels and temperatures. Transportation Damage: Every effort has been made to ensure that your IGNITECH Furnace will arrive in perfect condition. Any visible damage should be noted on the freight bill at the time of delivery. If upon unpacking your IGNITECH Furnace you find damage has occurred during transit, notify your supplier immediately. Your supplier will advise you what actions must be taken to address the problem. Disclaimer Notice: The listed BTU rating for your new IGNITECH Furnace was obtained using laboratory calculations. The actual BTU output you experience may vary somewhat depending on the type, condition and moisture content of the fuel used, damper adjustment, chimney type and other factors. Therefore, the manufacturer disclaims any guarantee as to the BTU output or capacity. IGNITECH Industries disclaims any responsibility for the following: installation of a furnace that has been altered or modified in any way; installation of the furnace other than as instructed in this manual; installation and/or use of any component or part not approved by IGNITECH Industries for use with this furnace. Be sure to complete and return your warranty card within 30 days of purchase in order to activate warranty coverage on your furnace. Manufacturer’s Notice: Please be advised that we periodically make changes to improve our products, therefore the information in this manual may not be completely applicable to your IGNITECH Furnace. Please refer to markings on the appliance for additional information. THIS IS A WOOD AND COAL BURNING FURNACE ONLY AND SHOULD NOT BE ALTERED IN ANY WAY. FOR COMMERCIAL USE ONLY.
1
Made with FlippingBook - professional solution for displaying marketing and sales documents online