3. Assemble the following parts using 6 #10 sheet metal screws. Both “B” and “C” panels should fit inside of “D” and “A” panel flanges. Attach “D” (bottom panel) to “B” (side panel with electric) and “C” (side panel). After the top and sides are assembled, attach ”A” (top panel) using 6 #10 sheet metal screws provided.
Top Panel (A) p n l (A)
Top Panel (A)
#10 Sheet Metal Screw Twelve Places 10 Sheet Metal Screw h t Metal Screw
Side Panel (C) Side Panel
Side Panel (C)
Side Panel With Electric (B) Side Panel with Electric (B) i e Panel with Electric (B)
Bottom Panel (D) Bottom Pan l
Bottom Panel (D)
4. Position the assembled filter box on rear of furnace, supporting it approximately 4 inches from the floor, covering the rear distribution blower. Make sure the filter box is tightly pressed to the back of the furnace. Use 8 #10 self-tapping screws (included) to firmly attach the filter box to the sides of the furnace.
Filter Box Filter Box Filter Box
#10 Screw #10 Screw #10 Screw
5
Made with FlippingBook - professional solution for displaying marketing and sales documents online